HP FlexFabric 5930 Series Configuration Manuals page 378

NMM NETCONF configuration data (all
modules), NM-269
NMM NETCONF configuration data (Syslog
module), NM-271
NMM NETCONF data entry (interface table),
NM-272
NMM NETCONF session information, NM-288
returning
NMM NETCONF CLI return, NM-290
to upper-level view from any view, FM-2
to user view, FM-2
reverse path forwarding. Use RPF
Revest-Shamir-Adleman Algorithm. Use RSA
RFC 1583 compatibility (OSPF), IPR-92
RIB
IP routing FIB route max lifetime, IPR-5
IP routing RIB label max lifetime, IPR-4
IP routing RIB route max lifetime, IPR-4
ring
configuring (RRPP), HA-61
configuring RRPP group, HA-66
disconnect state (RRPP), HA-50
health state (RRPP), HA-50
recovery (RRPP), HA-54
RRPP group, HA-51, HA-54
RIP. See also RIPng
additional routing metric configuration, IPR-30
basic configuration, IPR-27, IPR-43
BFD configuration, IPR-39
BFD configuration
detection), IPR-41
BFD configuration
detection/control packet mode), IPR-58
BFD configuration (single-hop echo detection),
IPR-52
BFD configuration
detection/neighbor), IPR-40
(bidirectional control
(bidirectional
(single-hop echo
BFD configuration
detection/specific destination), IPR-40, IPR-55
configuration, IPR-25, IPR-27, IPR-43
default route advertisement, IPR-32
displaying, IPR-43
ECMP route max number, IPR-35
enabling, IPR-27
FRR BFD enable, IPR-42
FRR configuration, IPR-41, IPR-61
FRR configuration restrictions, IPR-42
GR configuration, IPR-39
GR helper configuration, IPR-39
GR restarter configuration, IPR-39
high availability BFD-supported, HA- 1 84
host route reception disable, IPR-31
interface additional metric configuration, IPR-48
interface advertisement control, IPR-28
interface reception control, IPR-28
IPv6. See RIPng
maintaining, IPR-43
MPLS L3VPN MCE-PE RIP, MPLS-453
MPLS L3VPN MCE-VPN site RIP, MPLS-447
MPLS L3VPN PE-CE RIP configuration, MPLS- 1 90
neighbor specification, IPR-37
network management configuration, IPR-38
network optimization, IPR-34
network tuning, IPR-34
operation, IPR-25
packet max length, IPR-38
packet send rate configuration, IPR-38
poison reverse configuration, IPR-34
poison reverse enable, IPR-35
preference configuration, IPR-33
protocols and standards, IPR-26
received/redistributed route filtering, IPR-32
RIPv1 message zero field check enable, IPR-36
376
(single-hop echo