HP FlexFabric 5930 Series Configuration Manuals page 224

NETCONF
capability exchange, NM-261
CLI operations, NM-286, NM-287
CLI return, NM-290
configuration, NM-256, NM-259
configuration data retrieval (all modules),
NM-269
configuration data retrieval (Syslog module),
NM-271
configuration load, NM-274, NM-279
configuration lock/unlock, NM-264, NM-265
configuration rollback, NM-274
configuration rollback (configuration file-based),
NM-274
configuration rollback (rollback point-based),
NM-275
configuration save, NM-274, NM-280
data entry retrieval (interface table), NM-272
data filtering, NM-280
data filtering (conditional match), NM-285
data filtering (regex match), NM-284
edit-config operation, NM-268
event notification
NM-263
FIPS compliance, NM-259
get/get-bulk operation, NM-266
get-config/get-bulk-config operation, NM-268
message format, NM-257
NETCONF logging enable, NM-260
NETCONF over SSH enable, NM-260
over SOAP, NM-257
over SOAP enable, NM-259
parameter value change, NM-273
protocols and standards, NM-258
save-point/begin operation, NM-275
save-point/commit operation, NM-276
save-point/end operation, NM-277
subscription, NM-261,
save-point/get-commit-information
NM-278
save-point/get-commits operation, NM-277
save-point/rollback operation, NM-276
Secure Telnet client user line configuration,
SEC-330
service operations, NM-266
session establishment, NM-260
session information retrieval, NM-288
session termination, NM-289
SSH client user line configuration, SEC-330
SSH+password authentication configuration,
SEC-364, SEC-366
supported operations, NM-292
XML view, NM-261
network
6to4 tunnel configuration, IPSER-226, IPSER-227
802.1X access control method, SEC-87
802.1X architecture, SEC-67
802.1X authentication request attempts max
number, SEC-88
802.1X authentication server timeout timer,
SEC-88
802.1X authentication trigger, SEC-90
802.1X Auth-Fail VLAN, SEC-94
802.1X authorization state, SEC-86
802.1X critical VLAN, SEC-95
802.1X EAD assistant, SEC-96
802.1X EAP relay authentication, SEC-72
802.1X EAP relay enable, SEC-86
802.1X EAP termination enable, SEC-86
802.1X guest VLAN, SEC-93
802.1X online user handshake, SEC-89
802.1X online user handshake reply, SEC-90
802.1X periodic online user reauthentication,
SEC-92
802.1X port users max number, SEC-87
222
operation,