Parts List; General Maintenance - Brutus 10600BR Owner's Manual

PARTS LIST

Part No. Description
10604-2/3 Replacement Pads
10603-4 Rail Bars
10603-5 End Bracket
10604-15C Guide (complete with clamp lever)
10602-20 Bearing Assembly
10602-21 Bearing Assembly Only
10602-28 Handle with Grip
10602-29 Grip
10602-32 Breaker Bar
10602-34 Holder for Ball Bearing Wheel
10602-36 Handle complete with holder for ball bearing
wheel, breaker bar & slide assembly with
bearings (20, 21, 28, 32, 34)
10603-37 15-3/4" Aluminum Arms
21123 7/8" Titanium Coated Tungsten Carbide Ball
Bearing Cutting Wheel

GENERAL MAINTENANCE

1. Oil should not be used on the 10600BR Brutus Tile Cutter. Use of oil will cause eventual gumming
and sticking of the movable parts as the oil combines with dirt and ceramic tile dust.
2. Wear is normal in the chrome plated rails and can be evenly distributed by occasional rotation of
each of the two rails. For cutters with hex bolts holding the rails, loosen each hex bolt and slightly
rotate the rails. Retighten the hex bolts when finished.
3. The only part routinely needing replacement is the carbide scoring wheel. All other parts are
also available.
10602-29
10603-5
10603-4
10604-3 (R)
10603-37
10602-32
10604-2 (L)
Qty.
2
2
2
1
1
1
1
10604-15C
1
1
1
1
2
1
- 3 -
10602-28
10602-20
10602-34
21123
– (21123)
10602-21
10603-5