46
Conversion instructions WD4240
• Cut the power to the machine.
• Dismount the rear cover (A).
3
• Remove the screw on the side of the locking
6
plate x.
• Pull out the locking plate x, this releases the
6
gas pipe.
• Remove the nozzle (1).
• Turn the pipe a little and mount the supplied
7
gas nozzle.
• Push pipe with new nozzle back into its
place.
• Push locking plate all the way in and tighten
the screw.
Installation
6
7
1
X
7116
2
4+3
7117