Tables Of Pressure And Adjustments Wd4240 - Electrolux WD4130 Installation Manual

Table of pressure and adjustment WD4240
This gas appliance has been build to run on natural gas group I2H and I2E,
commonly identified by GNH. (Japan: LPG).
The data label shows the nozzle size and the nozzle pressure and the
countries that use this gas quality: AT,BG,CZ,DK,EE,FI,GR,HR,HU,IS,IE,IT,
LV, LT,NO,PT,RO,SK,SI,ES,SE,CH,TR,GB,and non-European countries.
Before connecting the appliance please make sure that the supplied gas
type is correct.
Following gas conversions are possible:
• Appliances to be installed to run on GNH or GNL in FR, BE: I2E+
• Appliances to be installed in NL, parts of DE: I2L, l2LL.
• Appliances to be installed to run on LPG in:
BE,CH,CY,CZ,ES,FR,GB,GR,IE,IT, LT,LU,LV,PT,SK,SI : l3+
• Appliances to be installed to run on LPG in: BE,CY,DK,EE,FR,GB,HU,IT,
LT,NL,NO,SE,SI,SK,RO, HR,TR,BG,IS,LU,MT and Non-European
countries: I3B/P (30 mbar) inlet pressure.
• Appliances to be installed to run on LPG in: PL: I3B/P (50 mbar) inlet
pressure.
• Appliances to be installed to run on LPG in: AT,CH,DE,SK: I3B/P
(37 mbar) inlet pressure.
• Appliances to be installed to run on LPG in: FI,NL,RO and Non-Europe-
an countries: I3P (30 mbar) inlet pressure.
• Appliances to be installed to run on LPG in:
BE,CH,CZ,IE,IT,ES,FR,GR,GB,HR, LT,NL,: I3P (37 mbar) inlet pressure.
• Appliances to be installed to run on LPG in: AT,CH,DE,NL,LU,SK: I3P
(50 mbar) inlet pressure.
WD4240 19 kW
Gas group Nozzle size
ø mm (1)
I2H, I2E 3.60
I2E+ 3.10
I2L, 12LL 3.60
I3+ 2.20
I3B/P 2.20
I3P 2.30
LPG Japan 2.20
Installation
Air reducing Inlet pres-
plate sure (mbar)
A+D 20-25
B+C 20/25
A+D 20-25
D 28-30/37
D 30, 37, 50
D 30, 37, 50
D 28
Nozzle Label no.
pressure
(mbar)
10 DEFAULT
20/25 490375611
15 490375612
28-30/37 490375613
28 490375614
28 490375615
28 DEFAULT
45