Caring For Your Steam Mop - Shark S4601 Series Owner's Manual

Caring for Your Steam Mop

AFTER USE AND STORAGE
1
Press the Steam Control Button until the Steam Mop
returns to Standby Mode. Unplug the cord from the
outlet and place the Steam Mop into the upright
position. Let it cool.
2
Remove the Pocket Pad from the Mop Head by
undoing the hook-and-loop closure and using the
loop on the side to pull it off the Mop Head, avoiding
contact with the hot Pocket Pad.
9 1-800-798-7398
fig. 9
3
Empty the Water Tank before storing. Open the
Water Tank Cap and empty the Tank in a sink. Close
the Cap.
4
To store the Steam Mop hanging up, first remove
the Mop Head (after it has cooled and the steam
has been released), then hang on a large hook (not
included) (fig. 9).