Functional Description; Technical Data; Intended Use; Product Features - Bosch GGS 16 Professional Original Instructions Manual

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is designed for grinding and de-
burring metal using corundum grinding tools, as
well as for working with sanding wheels.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Collet chuck
2 Clamping nut
3 Grinder spindle
4 Spindle collar
5 On/Off switch
6 Safety switch against starting/Lock-on button
for On/Off switch
7 Open-end spanner, size 14 mm*
8 Open-end spanner, size 22 mm*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools

Technical Data

Straight grinder
Article number
Rated power input
Output power
Rated speed
Collet chuck diameter,
max.
Spindle collar dia.
Grinding tool diameter,
max.
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 85 dB(A);
Sound power level 96 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three
directions) determined according to EN 60745:
Grinding surfaces (roughing): Vibrational emis-
sion value a =6 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
English | 17
GGS 16
Professional
0 601 209 1..
W
W
-1
min
mm
mm
mm
kg
2
, uncertainty K=1.5 m/s
3 609 929 B89 | (23.7.09)
900
480
16000
10
43
50
3.0
/II
2
.