Usb-Connection To A Computer; Connecting An External Audio Source Via Line-In Socket; Sd Memory Card - Bones Milestone 212 Ace User Manual

1.2.3. USB-connection to a computer

In order to back up your data, connect your Milestone 212 Ace to a computer via USB-
cable. The built-in USB 2.0 Hi-Speed port allows for quick transfer times.
Plug the smaller end of the cable into the mini-USB-connector, which is located at the
center of the top side of your Milestone 212 Ace.
The larger end connects to a standard USB-port on your computer. Your Milestone 212
Ace will confirm a successful connection to your computer with the message „connection
activated".
The device will then be accessible on your computer as an external drive, named
"M212ACE". Once the data transfer is complete, please make sure that you remove your
Milestone 212 Ace drive safely from your computer, as you would do with a USB-stick.
Milestone will acknowledge that it was properly disconnected from the computer with the
audible message „connection deactivated".
Your Milestone's battery will be charged during an active USB connection. Please note
that the Milestone's buttons are locked, while connected via USB.

1.2.4. Connecting an external audio source via line-in socket

The line-in socket is located to the right of the USB-port and can be used to record from
any external audio source, such as a microphone, CD-player or radio.
Simply connect the external audio source to the line-in socket of your Milestone 212 Ace,
using a regular stereo audio cable with a standard 3.5 mm jack.
Please refer to chapter 4.6 for more detailed information about external microphones.

1.2.5. SD memory card

You can expand the Milestone 212 Ace's internal 2.5 GB of memory by using SD or SDHC
memory cards with a capacity of up to 32 GB. This allows you to store even more books,
notes, music and other files.
SD cards from SanDisk, Kingston, Transcend or Toshiba are recommended for a hassle-
free experience.
The Milestone's SD card slot is located on the right side of the device. Insert the SD card
with its label facing up and make sure that it properly locks into place. In order to remove
the SD card, gently push the storage device in until you hear a click and then release it.
This will push the SD card out slightly, allowing you to grasp it with your fingers.
Please ensure that the card is inserted the correct way, with the notched corner facing
away from the user.
The voice recorder always saves your files to the internal memory of the Milestone 212
Ace. To free up more space and to back up your data, you can move your recorded notes
to an SD card.
Helpful hint: It's highly recommended to back up the Milestone 212 Ace's internal memory
data to an SD card on a regular basis.
3
/17