TRENDnet TK-804R Quick Installation Manual page 6

3. If you have a third KVM switch, connect one
end of the daisy-chain to the Daisy-Chain OUT
port on the second KVM switch. Then connect
the opposite end of the daisy-chain cable to the
Daisy-Chain IN port on the third (slave) switch.
Repeat for each additional switch.
4. Connect the included Daisy-Chain terminator to
the Daisy-Chain OUT port on the last KVM
switch in the chain
5. Turn ON the connected computers one-by-one
and wait until each computer's desktop
appears.
4