Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Article Name
1)
Status Indicator
2)
LAN Indicator
3)
Disk Indicator
4)
SD Card Slot
5)
USB 2.0 Port
6)
Copy Button
7)
Power Button
8)
Fan
9)
USB 3.0 Port
10)
RESET Button
11)
LAN Port
12)
eSATA Port
13)
Power Port
Kensington
14)
Security Slot
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "Appendix B: LED
Indicator Table".
Displays the status of the network connection. For more information, see
"Appendix B: LED Indicator Table".
Displays the status of installed drives. For more information, see "Appendix B:
LED Indicator Table".
Insert SD cards here.
Front Panel
Connect external hard drives, USB printers, or other USB devices to the
DiskStation here.
Lights up when you connect a USB device (e.g. digital camera, USB flash disk,
etc.). Press the copy button to copy data from the connected USB device to
internal drives.
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep sound and
the Power LED starts blinking.
Disposes of excess heat and cools the system. If the fan malfunctions, the
DiskStation will emit a beeping sound.
Connect external hard drives, USB printers, or other USB devices to the
DiskStation here.
1. Press and hold until you hear a beep sound to restore the default IP address,
DNS server, and passwords for users belonging to the administrators
2. Press and hold until you hear a beep sound, then press and hold again until
you hear three beep sounds to return the DiskStation to "Not Installed" status
Back Panel
so that DiskStation Manager (DSM) can be reinstalled.
Connect network cables here.
Connect external SATA disks here.
Connect AC adapter here.
Attach a Kensington lock here.
Description
group.
Hide quick links:
Advertisement
Table of Contents
