Table of Contents
Advertisement
SAR compliance for body-worn operation is based on a separation distance
of 0 .4 inches (10 mm) between the unit and the human body . Carry this
device at least 0 .4 inches (10 mm) away from your body to ensure RF
exposure level compliant or lower to the reported level . To support body-worn
operation, choose the belt clips or holsters, which do not contain metallic
components, to maintain a separation of 0 .4 inches (10 mm) between this
device and your body .
RF exposure compliance with any body-worn accessory, which contains
metal, was not tested and certified, and use such body-worn accessory
should be avoided .
FCC regulations
This mobile phone complies with part 15 of the FCC Rules . Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation .
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules . These limits are
designed to provide reasonable protection against harmful interference in
a residential installation . This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications .
However, there is no guarantee that interference will not occur in a particular
installation . If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna .
• Increase the separation between the equipment and receiver .
122
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected .
• Consult the dealer or an experienced radio/TV technician for help .
Caution: Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment .
The antenna(s) used for this transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter .
Hearing aid compatibility (HAC) regulations for
mobile phones
In 2003, the FCC adopted rules to make digital wireless telephones
compatible with hearing aids and cochlear implants . Although analog
wireless phones do not usually cause interference with hearing aids or
cochlear implants, digital wireless phones sometimes do because of
electromagnetic energy emitted by the phone's antenna, backlight, or
other components . Your phone is compliant with FCC HAC regulations
(ANSI C63 .19-2011) .
While some wireless phones are used near some hearing devices (hearing
aids and cochlear implants), users may detect a buzzing, humming, or
whining noise . Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of interference they
generate . The wireless telephone industry has developed ratings for some
of their mobile phones to assist hearing device users in finding phones that
may be compatible with their hearing devices . Not all phones have been
rated . Phones that have been rated have a label on the box . These ratings are
not guaranteed . Results will vary, depending on the level of immunity of your
hearing device and the degree of your hearing loss . If your hearing device
happens to be vulnerable to interference, you may not be able to use a rated
phone successfully . Trying out the phone with your hearing device is the best
way to evaluate it for your personal needs .
FOR YOUR SAFETY
FOR YOUR SAFETY
123
Advertisement
Table of Contents
