Controls & Connections; Front Panel; Using The Jag Wheel; Using The Quick Menu - Vizio XVT3D650SV User Manual

Controls & Connections
Before the first-time setup, take a few moments to familiarize yourself with the
various controls and connections. This will make the setup process much faster
and your experience with the TV much more enjoyable!

Front Panel

Remote Control
Sensor
Remote Control Sensor: Point the remote directly at this sensor when
using it in IR mode.
VIZIO Light: When the TV is on, the light is white.
When the TV is off, the light is orange.
After you set up the remote to work in Bluetooth mode, you do not
have to point it at the Remote Control Sensor to use it. See Activating
the Bluetooth Remote Control on page 8.

Using the Jag Wheel

The Jag Wheel is an innovative, all-in-one control on the side of your HDTV that
performs functions you might see as buttons on other TVs. Functions including
volume up/down, power, input source, and channel up/down have been combined
into a single Quick Menu controlled by the Jag Wheel.
VIZIO Light
Front Panel
To power the TV on or off:
To increase or decrease the volume, turn the Jag Wheel.

Using the Quick Menu

To open the Quick Menu, press the Jag Wheel. Turn the Jag Wheel to highlight a
function. Press the Jag Wheel to select the highlighted function.
Volume: Select to increase or
decrease volume.
Channel: Open the channel list and
select a channel.
Input Source: Change the input
device.
Exit: Close the Quick Menu.
Power Off: Turn the TV off.
The Quick Menu closes automatically after
10 seconds if no activity is detected.
Jag Wheel
2
Jag Wheel
5