Table of Contents
Advertisement
7
Maintenance and cleaning
Service life of product extends and frequently
experienced problems will be reduced if it is cleaned at
regular intervals.
7.1 Cleaning Lint Filter / Loading Door
Inner Surface
Lint and fiber released from the laundry to the air during
the drying cycle are collected in the Lint Filter.
C
Such fiber and lint are generally formed
during wearing and washing.
A
Always clean the lint filter and the inner
surfaces of the loading door after each
drying process.
C
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
• Open the loading door.
• Remove the lint filter by pulling it up and open the
lint filter.
• Clean lint, fiber, and cotton raveling by hand or with
a soft piece of cloth.
• Close the lint filter and place it back into its housing.
• A layer can build up on the filter pores that can
cause clogging of the filter after using the dryer for a
while. Wash the lint filter with warm water to remove
the layer that builds up on the lint filter surface. Dry
the lint filter completely before reinstalling it.
26 /32 EN
• Clean the entire inner surface of the loading door
and loading door gasket with a soft damp cloth.
Dryer / User Manual
Advertisement
Table of Contents
