Shark S3601QUK Owner's Manual page 3

12. DO NOT unplug by pulling on
power cord. To unplug, grasp the
plug not the power cord. Do not
use extension cords or outlets
with inadequate current carrying
capacity.
13. DO NOT put any objects into
openings. Do not use with any
opening that is blocked.
14. DO NOT put hands or feet under
the steam mop. Unit gets very hot.
15. Use ONLY on flat, horizontal
surfaces. Do not use on walls,
counters or windows.
16. DO NOT use on leather, wax
polished furniture or floors,
synthetic fabrics, velvet or other
delicate, steam sensitive materials.
17. DO NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the
unit or make it unsafe for use. If
you live in a hard water area, we
recommend using distilled water in
your steam mop.
18. When in use, NEVER turn the
appliance over or on its side.
NEVER DIRECT STEAM TOWARDS
PEOPLE, ANIMALS OR PLANTS.
19. NEVER LEAVE THE STEAM MOP
IN ONE SPOT ON ANY SURFACE
FOR ANY PERIOD OF TIME WHEN
MICROFIBRE PAD IS ATTACHED
AS THIS WILL DAMAGE YOUR
FLOORS.
20. Carefully remove the microfibre
cleaning pad immediately after you
have unplugged and allowed the
steam mop to cool.
21. When cleaning the steam mop,
unplug the power cord from the
electrical outlet and clean with a
dry or damp cloth. Do not pour
water or use alcohol, benzene or
paint thinner on the unit.
22. Extreme caution should be
exercised when using this
appliance to clean stairs.
23. Never use steam mop without
microfibre cleaning pad attached.
24. Keep your work area well lit.
25. Store steam mop indoors in a cool,
dry place.
26. To avoid circuit overload, do not
operate another appliance on the
same socket (circuit) as the steam
cleaner.
27. If an extension cord is absolutely
necessary, an extension cord rated
a minimum of 15 ampere, 14 gage
cord should be used. Cords rated
for less amperage may overheat.
Care should be taken to arrange
cord so that it cannot be pulled or
tripped over.
28. DO NOT leave your Steam Mop
unattended when the system is
connected to a power supply
/electrical outlet.
29. DO NOT store unit with damp or
wet microfibre cleaning pocket
attached. Never leave the steam
mop in one spot on any surface
for any period of time with a damp
or wet microfibre cleaning pocket
attached as this will damage your
floors.
30 Always unplug and allow the steam
mop to cool before removing or
changing mop heads.
WARNING
Your steam mop is designed to
clean hard floor surfaces that will
withstand high heat. Do not use
on unsealed wood or unglazed
ceramic floors. On surfaces that
have been treated with wax or
some no wax floors, the sheen may
be removed by the heat and steam
action. It is always recommended
to test an isolated area of the
surface to be cleaned before
proceeding. We also recommend
that you check the use and
care instructions from the floor
manufacturer.
SAVE THESE
INSTRUCTIONS
: