Daikin brp069a42 Technical Data Manual page 94

Restrictions in Continuous Installation
In case where several devices are set up and installation inside the power board is carried out, each equipment installation
space and space between the wall surface and this equipment should be left at least as shown below.
(To Remove Front Panel:)
"1.5.4 Electric Wiring Work and Initial Setting" should be performed with the front panel removed. The front panel can
be removed by detaching 2 front panel screws shown in the figure above and sliding it lightly to the upper side. Upon
completion of all wiring connections and setting operations, close the front panel as it was and screw it firmly.
• intelligent Touch Manager • ED721208
DEC101A51
40
DEC101A51
140
Fix the DEC101A51 firmly with
the installation screws (M4)
• Control systems
DEC101A51
40 40
DEC101A51
Unit (mm)
93