Main Screen Without Password Check - Mistral 360 User Manual

Rev. 2.11 Manual Mistral 360 January 2016

3.1 Main screen without password check

This screen will be displayed when in the menu "Settings \ Display & Sound" the function "Use user
& password" is set to "No".
The main screen without the use of passwords is shown below.
3.1.1 Lay-out of the main screen.
The upper left corner displays the current date, the upper right corner displays the current time.
Both can be changed at "Settings / Date and Time". (See "Machine settings en info")
Recipe: Name of the current soldering profile.
Customer: Name of the current client.
Act.( ̊ C ): The actual zone temperature.
Set.( ̊ C ): The set zone temperature.
Sensor 1 en 2: it might be useful to check the temperature of the product during the production
process, to make sure the soldered component has the correct temperature the appropriate amount
of time. To do this at least one thermocouple sensor must be attached to the product. The melting
temperature can be modified in the "Recipe editor".
The first number represents the actual temperature (°C). The second number represents the time the
component is at melting temperature.
Sensors: This button will only show if at least one thermocouple sensor has been connected. The
thermocouple functions as described as before in "Sensor 1 en 2" is turned on and off by this button.
If switched on "Sensor On" will be displayed in red.
Belt speed: This is the speed of the belt as set in the recipe. The belt speed can be adjusted by
cm/min with the buttons "+" and "–". The belt speed can also be adjusted at the "Recipe editor".
If the profile has to be changed the user should press on the value that should be changed. This will
display the "Recipe editor". This screen will be discussed in the chapter "Recipe editor".
Invisible button: There is an invisible button between the "Sensor" and "Recipes" buttons. By
pressing this button you will put the screen in "Max. brightness" mode. This option is set at the
"Display & Sound" screen. Please refer to "Display & Sound" for more information.
©Spidé, the Netherlands Page 7