Edit User Data - Mistral 360 User Manual

Rev. 2.11 Manual Mistral 360 January 2016

3.9 Edit user data

If you ticked "Edit" in the "User maintenance" screen this screen is showing up. Here you can change
the name, password and rights of an operator.
The "Edit user data" screen is showed below.
3.9.1 Functions explained
Save: Save all changes you've made.
Cancel: Close the screen and lose all changes.
3.9.2 Fields explained.
Username: Ticking on the name value will open an alpha-numeric keyboard. You're then capable to
change the name.
Password: Ticking on the password value will open an alpha-numeric keyboard. You're then capable
to change the password.
Group: By ticking on the group value you will toggle between "User" and "Admin". These groups
represents the rights the user will have on the machine. In this case "User" and "Admin" are not
names but functions.
3.9.3 Explaining groups
If the user belongs to the "Admin" group. This user can change all settings and values on the
machine.
If the user belongs to the "User" group. This user can only use the machine by starting or stopping
the machine, making a profile, select another recipe or change belt speed.
The group "User" cannot change values or settings.
©Spidé, the Netherlands Page 20