Network Setup - Spyclops SPY-DVR4HYB Instruction Manual

Sensor Setup (Does not apply)
3.11 Network Setup
DHCP: Check box when user needs an IP address
•
ESEE(P2P): Keep box checked when user wants to view the DVR system through a mobile
•
device
IP address: This is the unique address assigned to your DVR and will be used locally (within
•
your network) in a web browser to view your DVR recording. This is also the address you will
use if you need to port forward (for assistance with port forwarding, you can go to
portforward.com for instruction according to your router model).
*Note: you will need to allow Active X to install on your browser to view remotely
Gateway: This will be your router address.
•
MAC address: The physical address of the DVR.
•
Preferred DNS: This is the address for routing web access. Not to be confused with DDNS.
•
Web port: This will need to be updated to the new port number if port forwarding is done
•
through another port besides 80.
Show QR Code: This button will populate a QR code to scan with mobile device to have access
•
to the ESEE app
NETWORK SETUP
17