Page 2 END USER LICENSE AGREEMENT The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at http://www.juniper.net/support/eula.html.
Page 4 Troubleshooting Components ........49 Contacting Juniper Networks Technical Assistance Center ....49...
Page 11: About The Documentation
® To obtain the most current version of all Juniper Networks technical documentation, see the product documentation page on the Juniper Networks website at http://www.juniper.net/techpubs/ If the information in the latest release notes differs from the information in the documentation, follow the product Release Notes.
Page 12: Table 1: Notice Icons
Juniper Secure Analytics 3800 Hardware Guide Table 1: Notice Icons Icon Meaning Description Informational note Indicates important features or instructions. Caution Indicates a situation that might result in loss of data or hardware damage. Warning Alerts you to the risk of personal injury or death.
Page 13: Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can improve the documentation. You can provide feedback by using either of the following methods: Online feedback rating system—On any page at the Juniper Networks Technical Documentation site at , simply click the http://www.juniper.net/techpubs/index.html...
Page 14: Requesting Technical Support
7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...
Page 15 About the Documentation For international or direct-dial options in countries without toll-free numbers, see http://www.juniper.net/support/requesting-support.html Copyright © 2015, Juniper Networks, Inc.
Page 19: System Overview
JSA3800 Appliance Description on page 3 JSA3800 Appliance Hardware Overview on page 4 JSA3800 Appliance Description The Juniper Secure Analytics 3800 (JSA3800) is an enterprise-class appliance that provides a scalable network security management solution for medium-sized companies up to large global organizations.
Page 20: Jsa3800 Appliance Hardware Overview
Juniper Secure Analytics 3800 Hardware Guide JSA3800 Appliance Hardware Overview The JSA3800 appliance provides the following features: Monitor utility for power supply unit (PSU) and fans Add setup logs automatically Support high availability (HA) Hot-swappable hard disk supporting RAID Automatic RAID rebuild on HDD swap...
Page 21: Hardware Component Overview
Hardware Component Overview JSA3800 Appliance Components Overview on page 5 JSA3800 Appliance Components Overview Juniper Secure Analytics (JSA) includes the following deployment components: Flow Processor —Collects data from devices, and various live and recorded feeds, such as network taps, span/mirror ports, NetFlow, and JSA flow logs. When the data is collected, the Flow Processor groups related individual packets into a flow.
Page 22 Juniper Secure Analytics 3800 Hardware Guide A non-console Event Processor can be connected to the Event Processor on the console or connected to another Event Processor in your deployment. The Accumulator is responsible for gathering flow and event information from the Event Processor.
Page 23: Chassis Description
Table 3 on page 7 provides information about the front panel components of the JSA3800 appliance. Table 3: JSA3800 Front Panel Components Callout Component Description Front bezel Protects the appliance. Lock Locks the appliance. Copyright © 2015, Juniper Networks, Inc.
Page 24: Figure 2: Jsa3800 Front Panel Leds
Juniper Secure Analytics 3800 Hardware Guide Table 3: JSA3800 Front Panel Components (continued) Callout Component Description Hard drive Six 900 GB hard disk drives (Drive0 - Derive 5). Drive1 (top left) and Drive0 (bottom left) Drive3 (top middle) and Drive2...
Page 25: Jsa3800 Appliance Back Panel Description
Figure 3 on page 9 shows the back panel components of the JSA3800 appliance. Figure 3: JSA3800 Back Panel Table 5 on page 10 provides information about the back panel components of the JSA3800 appliance. Copyright © 2015, Juniper Networks, Inc.
Page 26: Figure 4: Jsa3800 Ethernet Port Leds
Juniper Secure Analytics 3800 Hardware Guide Table 5: JSA3800 Back Panel Components Callout Components Description Power supply Provides power to all components. Dedicated IPMI LAN port 1 dedicated IPMI LAN port. GB ports 2 RJ-45 Gigabit Ethernet LAN ports. The left Ethernet port is Eth0 and the right Ethernet port is Eth1.
Page 27: Chassis Description
Chapter 3: Chassis Description Related JSA3800 Appliance Description on page 3 Documentation JSA3800 Appliance Hardware Overview on page 4 JSA3800 Appliance Front Panel Description on page 7 Copyright © 2015, Juniper Networks, Inc.
Page 29: Site Planning And Specifications
PART 2 Site Planning and Specifications Planning and Preparing the Site on page 15 Network Transceiver Specifications on page 19 Copyright © 2015, Juniper Networks, Inc.
Page 31: Planning And Preparing The Site
Additional Hardware Requirements on page 17 Documentation JSA3800 Appliance Rack Requirements on page 17 JSA3800 Appliance Physical Specifications on page 15 JSA3800 Appliance Physical Specifications Table 7 on page 16 lists the specifications for the JSA3800 appliance. Copyright © 2015, Juniper Networks, Inc.
Page 32: Table 7: Jsa3800 Appliance Physical Specifications
Juniper Secure Analytics 3800 Hardware Guide Table 7: JSA3800 Appliance Physical Specifications Specification JSA3800 Dimensions (D x W x H) 437 mm x 43 mm x 597 mm (17.2 in. x 1.7 in. x 23.5 in.) Weight 27.9 lb Warranty...
Page 33: Jsa3800 Appliance Rack Requirements
JSA3800 Appliance Physical Specifications on page 15 General Site Installation Guidelines for the JSA3800 Appliance on page 15 Additional Hardware Requirements Before installing your JSA3800 appliances, ensure that you have access to the following additional hardware components: Copyright © 2015, Juniper Networks, Inc.
Page 34: Table 9: Required Jsa Ports
We recommend that you install JSA on your LAN to ensure that it can communicate with your applicable resources, such as authentication servers, DNS servers, internal webservers through HTTP/HTTPS, external websites through HTTP/HTTPS (optional), the Juniper Networks update server through HTTP, network file system (NFS) file servers (optional), and client/server applications (optional).
Page 35: Network Transceiver Specifications
Card Model Description SFP+ UNIV-SFPP-DUAL-SR Dual Rate 10GBASE-LR/1000BASE-LX UNIV-SFPP-DUAL-LR Dual Rate 10GBASE-SR/1000BASE-SX Related JSA3800 Appliance Description on page 3 Documentation JSA3800 Appliance Back Panel Description on page 9 JSA3800 Appliance Physical Specifications on page 15 Copyright © 2015, Juniper Networks, Inc.
Page 37: Initial Installation And Configuration
Installing the JSA3800 Appliance on page 25 Grounding the JSA3800 Appliance on page 33 Connecting the JSA3800 Appliance to External Devices on page 35 Providing Power to the JSA3800 Appliance on page 37 Performing the Initial Configuration on page 39 Copyright © 2015, Juniper Networks, Inc.
Page 39: Installation Overview
Tools and Parts Installing the JSA3800 appliance Phillips (+) screwdriver, number 1 Phillips (+) screwdriver, number 3 Tie wrap Connecting the JSA3800 appliance ESD grounding wrist strap Grounding the JSA3800 appliance Phillips (+) screwdriver, number 1 Copyright © 2015, Juniper Networks, Inc.
Page 40 Juniper Secure Analytics 3800 Hardware Guide Table 11: Required Tools and Parts for Installing the JSA3800 Appliance (continued) Task Tools and Parts Packing the JSA3800 appliance Electrostatic bag or antistatic mat, for each component ESD grounding wrist strap Related Overview of Installing the JSA3800 Appliance in a Rack on page 23...
Page 41: Installing The Jsa3800 Appliance
“Connecting the JSA3800 Appliance to a DC Power Source” on page Plug the other end of the power cord into a wall socket. Plug the Ethernet cable into the Ethernet port on the back panel. Copyright © 2015, Juniper Networks, Inc.
Page 42: Figure 6: Jsa3800 Front Panel Leds
Juniper Secure Analytics 3800 Hardware Guide When you turn on the power, the internal port uses two LEDs to indicate the LAN connection status, as shown in Figure 6 on page Figure 6: JSA3800 Front Panel LEDs 1— Information LED 4—...
Page 43: Four-Post Rack
Adjust the length of the rails so that they fit snugly into the rack. c. Secure the rails to the front and rear of the rack using three M5 screws each as shown in Figure 8 on page Copyright © 2015, Juniper Networks, Inc.
Page 44: Figure 8: Installing The Outer Rails In A Rack
Juniper Secure Analytics 3800 Hardware Guide Figure 8: Installing the Outer Rails in a Rack Align the rear of the chassis inner rails with the front of the rack rails as shown in Figure 9 on page Figure 9: Aligning the Chassis in a Rack...
Page 45: Mid-Mounting The Jsa3800 Appliance In A Two-Post Rack
Secure four brackets to the rack posts at the desired position. Secure two brackets to the front rack posts and attach two brackets to the rear rack posts as shown in Figure 11 on page Copyright © 2015, Juniper Networks, Inc.
Page 46: Figure 11: Securing The Brackets To The Rack
Juniper Secure Analytics 3800 Hardware Guide Figure 11: Securing the Brackets to the Rack Mount the outer rails on the rack by securing the racks to the brackets using M5 screws as shown in Figure 12 on page Copyright © 2015, Juniper Networks, Inc.
Page 47: Figure 12: Mounting The Outer Rails To The Rack
Secure an additional bracket to the front of each outer rail using two M5 screws as shown in Figure 13 on page Figure 13: Securing Brackets to the Outer Rail Install the inner rails on the chassis. Copyright © 2015, Juniper Networks, Inc.
Page 48: Figure 14: Attaching The Inner Rail Extension
Juniper Secure Analytics 3800 Hardware Guide a. Place the inner rail extensions on the side of the chassis such that the hooks on the chassis clip securely into the rail extension holes. b. Slide the extensions toward the front of the chassis.
Page 49: Grounding The Jsa3800 Appliance
AC power cord (with the grounding pin) appropriate for your geographical location. Related Connecting the JSA3800 Appliance to a DC Power Source on page 37 Documentation Installing the JSA3800 Appliance on page 25 JSA3800 Appliance Back Panel Description on page 9 Copyright © 2015, Juniper Networks, Inc.
Page 51: Connecting The Jsa3800 Appliance To External Devices
To connect a management device with the JSA3800 appliance: Connect external devices using the ports on the back panel of the appliance. If you use a laptop, connect the laptop to the DB-9 serial console port on the back panel. Copyright © 2015, Juniper Networks, Inc.
Page 52 Juniper Secure Analytics 3800 Hardware Guide Plug an Ethernet cable into the network port on the back panel. Plug a RS-232 (DB-9 F/F) cable into the console port. NOTE: When using a laptop to connect to the appliance, you must use a terminal program, such as HyperTerminal, to connect to the appliance.
Page 53: Providing Power To The Jsa3800 Appliance
You connect DC source power to the JSA3800 appliance by attaching power cables from the external DC power sources to the terminal studs on the DC power feed faceplates. WARNING: DC-powered JSA3800 appliances are intended for installation only in restricted access locations. Copyright © 2015, Juniper Networks, Inc.
Page 54 Juniper Secure Analytics 3800 Hardware Guide WARNING: Before you perform the following procedure, ensure that power is removed from the DC circuit. To ensure that all power is off, locate the circuit breaker on the panel board that services the DC circuit, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit breaker in the OFF position.
Page 55: Performing The Initial Configuration
Accessing the JSA Interface on page 43 Preparing the Network Hierarchy Juniper Secure Analytics (JSA) uses the network hierarchy to determine your network traffic and provides you with the ability to view network activity for your entire deployment. JSA supports any network hierarchy that can be defined by a range of IP addresses.
Page 56: Identifying Network Settings
Identifying Security Monitoring Devices and Flow Data Sources on page 40 Identifying Network Assets on page 41 Identifying Network Settings Before you install Juniper Secure Analytics (JSA), you must have the following information for each system you want to install: Hostname...
Page 57: Identifying Network Assets
Chapter 11: Performing the Initial Configuration Identifying Network Assets Juniper Secure Analytics (JSA) can learn about your network and server infrastructure based on flow data. The Server Discovery function uses the JSA Asset Profile database to discover many types of servers.
Page 58: Configuring The Basic Settings On The Jsa3800 Appliance
Juniper Secure Analytics 3800 Hardware Guide Configuring the Basic Settings on the JSA3800 Appliance To configure the basic setting using the JSA interface: NOTE: When using a laptop to connect to the appliance, you must use a terminal program, such as HyperTerminal, to connect to the appliance.
Page 59: Accessing The Jsa Interface
JSA3800 Appliance Physical Specifications on page 15 Connecting the JSA3800 Appliance to a Management Device on page 35 Accessing the JSA Interface Purpose To access a Juniper Secure Analytics (JSA) interface: Action Open your Web browser. Copyright © 2015, Juniper Networks, Inc.
Page 60 Click Login To JSA The JSA interface appears. You are now ready to start tuning JSA and high availability (HA) settings. For more information, see the Juniper Secure Analytics Administration Guide. NOTE: You will need a permanent license for the JSA appliance to upgrade to a higher version.
Page 61: Maintaining And Troubleshooting Components
PART 4 Maintaining and Troubleshooting Components Maintaining Components on page 47 Troubleshooting Components on page 49 Copyright © 2015, Juniper Networks, Inc.
Page 63: Maintaining Components
0 display NOTE: You can use this command if the volume state is degraded. For the RAID consistency check, use sas2ircu 0 constchk <id> where <id> is the Volume ID displayed in the Status output. Copyright © 2015, Juniper Networks, Inc.
Page 64: Maintaining The Jsa3800 Power Supply
Juniper Secure Analytics 3800 Hardware Guide NOTE: Run a consistency check on the JSA3800 appliance at least once a month to ensure that the defects are mapped out in case of a drive failure. Related JSA3800 Appliance Physical Specifications on page 15...
Page 65: Troubleshooting Components
CHAPTER 13 Troubleshooting Components Contacting Juniper Networks Technical Assistance Center on page 49 Contacting Juniper Networks Technical Assistance Center If you need assistance while troubleshooting a JSA appliance, open a support case using the Case Manager link at , or call 1-888-314-JTAC (within http://www.juniper.net/support/...
Page 69: Overview Of Replacing Components
Replacing an AC Power Supply on the JSA3800 Appliance on page 55 Replacing DC Power Supply Cables on the JSA3800 Appliance on page 57 Replacing a DC Power Supply on the JSA3800 Appliance on page 56 Copyright © 2015, Juniper Networks, Inc.
Page 71: Replacing Power System Components
Replacing AC Power Supply Cables on the JSA3800 Appliance on page 56 Documentation Replacing DC Power Supply Cables on the JSA3800 Appliance on page 57 Replacing a DC Power Supply on the JSA3800 Appliance on page 56 Copyright © 2015, Juniper Networks, Inc.
Page 72: Replacing Ac Power Supply Cables On The Jsa3800 Appliance
Juniper Secure Analytics 3800 Hardware Guide Replacing AC Power Supply Cables on the JSA3800 Appliance To replace an AC power supply cord: Attach an ESD grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
Page 73: Replacing Dc Power Supply Cables On The Jsa3800 Appliance
Replacing an AC Power Supply on the JSA3800 Appliance on page 55 Replacing a DC Power Supply on the JSA3800 Appliance on page 56 Connecting the JSA3800 Appliance to a DC Power Source on page 37 Copyright © 2015, Juniper Networks, Inc.
Page 75: Safety And Regulatory Compliance Information
Laser and LED Safety Guidelines and Warnings on page 77 Maintenance and Operational Safety Guidelines and Warnings on page 83 Electrical Safety Guidelines and Warnings on page 89 Agency Approvals and Regulatory Compliance Information on page 103 Copyright © 2015, Juniper Networks, Inc.
Page 77: General Safety Guidelines And Warnings
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische Copyright © 2015, Juniper Networks, Inc.
Page 78 Juniper Secure Analytics 3800 Hardware Guide schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard maatregelen om ongelukken te voorkomen. Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää...
Page 79: General Safety Guidelines And Warnings
Do not push or force any objects through any opening in the chassis frame. Such an action could result in electrical shock or fire. Avoid spilling liquid onto the chassis or onto any device component. Such an action could cause electrical shock or damage the device. Copyright © 2015, Juniper Networks, Inc.
Page 80: Qualified Personnel Warning
Juniper Secure Analytics 3800 Hardware Guide Avoid touching uninsulated electrical wires or terminals that have not been disconnected from their power source. Such an action could cause electrical shock. Always ensure that all modules, power supplies, and cover panels are fully inserted and that the installation screws are fully tightened.
Page 81: Warning Statement For Norway And Sweden
When handling any component that is subject to ESD damage and that is removed from the device, make sure the equipment end of your ESD grounding strap is attached to the ESD point on the chassis. Copyright © 2015, Juniper Networks, Inc.
Page 82: Figure 17: Placing A Component Into An Antistatic Bag
Juniper Secure Analytics 3800 Hardware Guide If no grounding strap is available, touch the exposed, bare metal of the device to ground yourself before handling the component. Avoid contact between the component that is subject to ESD damage and your clothing.
Page 83: Fire Safety Requirements
In addition, you should establish procedures to protect your equipment in the event of a fire emergency. Juniper Networks products should be installed in an environment suitable for electronic equipment. We recommend that fire suppression equipment be available in the event of a fire in the vicinity of the equipment and that all local fire, safety, and electrical codes and ordinances be observed when you install and operate your equipment.
Page 84 To keep warranties effective, do not use a dry chemical fire extinguisher to control a fire at or near a Juniper Networks JSA appliance or other network device provided by Juniper. If a dry chemical fire extinguisher is used, the unit is no longer eligible for coverage under a service agreement.
Page 85: Installation Safety Guidelines And Warnings
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden. Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia. ¡Atención! Ver las instrucciones de instalación antes de conectar el sistema a la red de alimentación. Copyright © 2015, Juniper Networks, Inc.
Page 86: Chassis Lifting Guidelines For The Jsa3800 Appliance
Juniper Secure Analytics 3800 Hardware Guide Varning! Läs installationsanvisningarna innan du kopplar systemet till dess strömförsörjningsenhet. Related Ramp Warning on page 70 Documentation Rack-Mounting Warnings on page 71 Grounded Equipment Warning on page 75 Maintenance and Operational Safety Guidelines and Warnings on page 83 Chassis Lifting Guidelines for the JSA3800 Appliance The weight of a fully loaded JSA3800 appliance is approximately 37 lb (16.8 kg).
Page 87: Rack-Mounting Warnings
Waarschuwing Om lichamelijk letsel te voorkomen wanneer u dit toestel in een rek monteert of het daar een servicebeurt geeft, moet u speciale voorzorgsmaatregelen nemen om ervoor te zorgen dat het toestel stabiel blijft. De onderstaande richtlijnen worden verstrekt om uw veiligheid te verzekeren: Copyright © 2015, Juniper Networks, Inc.
Page 88 Les directives ci-dessous sont destinées à assurer la protection du personnel: Le rack sur lequel est monté le Juniper Networks device doit être fixé à la structure du bâtiment. Si cette unité constitue la seule unité montée en casier, elle doit être placée dans le bas.
Page 89 Le seguenti direttive vengono fornite per garantire la sicurezza personale: Il Juniper Networks device deve essere installato in un telaio, il quale deve essere fissato alla struttura dell'edificio. Questa unità deve venire montata sul fondo del supporto, se si tratta dell'unica unità...
Page 90 Para garantizar su seguridad, proceda según las siguientes instrucciones: El Juniper Networks device debe instalarse en un bastidor fijado a la estructura del edificio. Colocar el equipo en la parte inferior del bastidor, cuando sea la única unidad en el mismo.
Page 91: Grounded Equipment Warning
Varning! Denna utrustning är avsedd att jordas. Se till att värdenheten är jordad vid normal användning. Related Installation Instructions Warning on page 69 Documentation Ramp Warning on page 70 Rack-Mounting Warnings on page 71 Maintenance and Operational Safety Guidelines and Warnings on page 83 Copyright © 2015, Juniper Networks, Inc.
Page 93: Laser And Led Safety Guidelines And Warnings
Unterminated optical connectors can emit invisible laser radiation. The lens in the human eye focuses all the laser power on the retina, so focusing the eye directly on a laser source—even a low-power laser—could permanently damage the eye. Copyright © 2015, Juniper Networks, Inc.
Page 94: Class 1 Laser Product Warning
Juniper Secure Analytics 3800 Hardware Guide Class 1 Laser Product Warning WARNING: Class 1 laser product. Waarschuwing Klasse-1 laser produkt. Varoitus Luokan 1 lasertuote. Attention Produit laser de classe I. Warnung Laserprodukt der Klasse 1. WARNING: Avvertenza Prodotto laser di Classe 1.
Page 95: Laser Beam Warning
ópticos. WARNING: ¡Atención! No mirar fijamente el haz ni observarlo directamente con instrumentos ópticos. WARNING: Varning! Rikta inte blicken in mot strålen och titta inte direkt på den genom optiska instrument. Copyright © 2015, Juniper Networks, Inc.
Page 96: Radiation From Open Port Apertures Warning
Juniper Secure Analytics 3800 Hardware Guide Related Radiation from Open Port Apertures Warning on page 80 Documentation Maintenance and Operational Safety Guidelines and Warnings on page 83 Installation Instructions Warning on page 69 Radiation from Open Port Apertures Warning Supported Platforms...
Page 97 Chapter 19: Laser and LED Safety Guidelines and Warnings Related Laser and LED Safety Guidelines and Warnings for JSA on page 77 Documentation Maintenance and Operational Safety Guidelines and Warnings on page 83 Installation Instructions Warning on page 69 Copyright © 2015, Juniper Networks, Inc.
Page 99: Maintenance And Operational Safety Guidelines And Warnings
Hävitä käytetyt akut valmistajan ohjeiden mukaan. Attention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, Copyright © 2015, Juniper Networks, Inc.
Page 100: Jewelry Removal Warning
Juniper Secure Analytics 3800 Hardware Guide recommandée par le fabricant. Jeter les piles usagées conformément aux instructions du fabricant. Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers.
Page 101: Lightning Activity Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity. Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen. Copyright © 2015, Juniper Networks, Inc.
Page 102: Operating Temperature Warning
To prevent the device from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 104° F (40° C) for network devices of Juniper Networks. To prevent airflow restriction, allow at least 6 in. (15.2 cm) of clearance around the ventilation openings.
Page 103: Product Disposal Warning
15,2 cm à volta das aberturas de ventilação. ¡Atención! Para impedir que un encaminador de la serie Juniper Networks device se recaliente, no lo haga funcionar en un área en la que se supere la temperatura ambiente máxima recomendada de 40°...
Page 104 Juniper Secure Analytics 3800 Hardware Guide Warnung Dieses Produkt muß den geltenden Gesetzen und Vorschriften entsprechend entsorgt werden. Avvertenza L'eliminazione finale di questo prodotto deve essere eseguita osservando le normative italiane vigenti in materia Advarsel Endelig disponering av dette produktet må skje i henhold til nasjonale lover og forskrifter.
Page 105: Electrical Safety Guidelines And Warnings
Related General Electrical Safety Guidelines and Warnings on page 90 Documentation Prevention of Electrostatic Discharge Damage on page 65 Multiple Power Supplies Disconnection Warning on page 100 TN Power Warning on page 100 Copyright © 2015, Juniper Networks, Inc.
Page 106: General Electrical Safety Guidelines And Warnings
Juniper Secure Analytics 3800 Hardware Guide General Electrical Safety Guidelines and Warnings Supported Platforms JSA1500, JSA3500, JSA5500, JSA7500 WARNING: Certain ports on the device are designed for use as intrabuilding (within-the-building) interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed outside plant (OSP) cabling.
Page 107: Ac Power Electrical Safety Guidelines
Do not circumvent this safety feature. Equipment grounding must comply with local and national electrical codes. You must provide an external certified circuit breaker rated minimum 20 A in the building installation. Copyright © 2015, Juniper Networks, Inc.
Page 108: Ac Power Disconnection Warning
Juniper Secure Analytics 3800 Hardware Guide The power cord serves as the main disconnecting device for the AC-powered device. The socket outlet must be near the AC-powered device and be easily accessible. For devices that have more than one power supply connection, you must ensure that all power connections are fully disconnected so that power to the device is completely removed to avoid electric shock.
Page 109: Dc Power Electrical Safety Guidelines
A DC-powered device that is equipped with a DC terminal block is intended only for installation in a restricted access location. In the United States, a restricted access area is one in accordance with Articles 110-16, 110-17, and 110-18 of the National Electrical Code ANSI/NFPA 70. Copyright © 2015, Juniper Networks, Inc.
Page 110: Dc Power Disconnection Warning
Juniper Secure Analytics 3800 Hardware Guide NOTE: Primary overcurrent protection is provided by the building circuit breaker. This breaker must protect against excess currents, short circuits, and earth grounding faults in accordance with NEC ANSI/NFPA 70. Ensure that the polarity of the DC input wiring is correct. Under certain conditions, connections with reversed polarity might trip the primary circuit breaker or damage the equipment.
Page 111 Varning! Innan du utför någon av följande procedurer måste du kontrollera att strömförsörjningen till likströmskretsen är bruten. Kontrollera att all strömförsörjning är BRUTEN genom att slå AV det överspänningsskydd som skyddar likströmskretsen och tejpa fast överspänningsskyddets omkopplare i FRÅN-läget. Copyright © 2015, Juniper Networks, Inc.
Page 112: Dc Power Grounding Requirements And Warning
Juniper Secure Analytics 3800 Hardware Guide Related General Electrical Safety Guidelines and Warnings on page 90 Documentation Prevention of Electrostatic Discharge Damage on page 65 AC Power Electrical Safety Guidelines on page 91 DC Power Electrical Safety Guidelines on page 93...
Page 113: Dc Power Wiring Sequence Warning
è da massa a massa, da positivo a positivo (da linea ad L) e da negativo a negativo (da neutro a N). Tenere presente che il filo di massa deve sempre venire collegato per primo e scollegato per ultimo. Copyright © 2015, Juniper Networks, Inc.
Page 114: Dc Power Wiring Terminations Warning
Juniper Secure Analytics 3800 Hardware Guide Advarsel Riktig tilkoples tilkoplingssekvens er jord til jord, +RTN til +RTN, –40 V til –60 V. Riktig frakoples tilkoplingssekvens er –40 V til –60 V, +RTN til +RTN, jord til jord. Aviso Ate con alambre la fuente de potencia cc Usando los terminales apropiados en el extremo del cableado.
Page 115 Varning! När flertrådiga ledningar krävs måste godkända ledningskontakter användas, t.ex. kabelsko av sluten eller öppen typ med uppåtvänd tapp. Storleken på dessa kontakter måste vara avpassad till ledningarna och måste kunna hålla både isoleringen och ledaren fastklämda. Copyright © 2015, Juniper Networks, Inc.
Page 116: Multiple Power Supplies Disconnection Warning
Juniper Secure Analytics 3800 Hardware Guide Related General Electrical Safety Guidelines and Warnings on page 90 Documentation AC Power Electrical Safety Guidelines on page 91 DC Power Electrical Safety Guidelines on page 93 DC Power Disconnection Warning on page 94...
Page 117 General Electrical Safety Guidelines and Warnings on page 90 Documentation Prevention of Electrostatic Discharge Damage on page 65 Multiple Power Supplies Disconnection Warning on page 100 Action to Take After an Electrical Accident on page 89 Copyright © 2015, Juniper Networks, Inc.
Page 119: Agency Approvals And Regulatory Compliance Information
AS/NZS CISPR22:2009 CISPR 24:1997/A1:2001/A2:2002 IT Equipment Immunity Characteristics EN 55024:1998/A1:2001/A2:2003 Information Technology Equipment Immunity Characteristics EN 300 386 V1.6.1 Telecom Network Equipment - EMC requirements BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions Copyright © 2015, Juniper Networks, Inc.
Page 120: Compliance Statements For Emc Requirements For The Jsa3800 Appliance
Juniper Secure Analytics 3800 Hardware Guide Related Compliance Statements for EMC Requirements for the JSA3800 Appliance on page 104 Documentation Compliance Statements for Acoustic Noise for the JSA3800 Appliance on page 106 Installation Instructions Warning on page 69 Compliance Statements for EMC Requirements for the JSA3800 Appliance...
Page 121: European Community
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Copyright © 2015, Juniper Networks, Inc.
Page 122: Compliance Statements For Acoustic Noise For The Jsa3800 Appliance
Juniper Secure Analytics 3800 Hardware Guide equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, might cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Page 125: Index
JSA3800................5, equipment warning............75 configuring JSA3800................33 JSA3800 basic settings..........42 guidelines connect lifting chassis..............70 a DC power source............37 management device.............35 Copyright © 2015, Juniper Networks, Inc.
Page 126 Juniper Secure Analytics 3800 Hardware Guide replacing a DC power supply........56 hardware replacing AC power supply cables......56 installing................25 replacing an AC power supply........55 setting up................17 required parts for installing........23 hardware feature required tools for installing.........23 JSA3800................4 setting up................17 hardware specification site installation guideline..........15...
Page 127 LEDs...............77 power disconnection..........92, levels..................61 product disposal.............87 lightning activity.............85 rack-mounting requirements........71 maintenance and operation........83 ramp angle................70 operating temperature..........86 read installation instructions........69 power disconnection..........92, TN power system............100 product disposal.............87 rack-mounting..............71 Copyright © 2015, Juniper Networks, Inc.

Juniper 3800 Hardware Manual

Chapter 1 System Overview

Chapter 2 Hardware Component Overview

Chapter 3 Chassis Description

Chapter 4 Planning and Preparing the Site

Chapter 5 Network Transceiver Specifications

Chapter 6 Installation Overview

Chapter 7 Installing the JSA3800 Appliance

Chapter 8 Groundingthejsa3800Appliance

Chapter 9 Connecting the JSA3800 Appliance to External Devices

Chapter 10 Providing Power to the JSA3800 Appliance

Chapter 11 Performing the Initial Configuration

Chapter 12 Maintaining Components

Chapter 13 Troubleshooting Components

Chapter 14 Overview of Replacing Components

Chapter 15 Replacing Power System Components

Chapter 16 General Safety Guidelines and Warnings

Chapter 17 Fire Safety Requirements

Chapter 18 Installation Safety Guidelines and Warnings

Chapter 19 Laser and LED Safety Guidelines and Warnings

Chapter 20 Maintenance and Operational Safety Guidelines and Warnings

Chapter 21 Electrical Safety Guidelines and Warnings

Chapter 22 Agency Approvals and Regulatory Compliance Information

Quick Links

Troubleshooting

Related Manuals for Juniper 3800

Summary of Contents for Juniper 3800

Table of Contents