Chassis Lifting Guidelines For The Jsa3800 Appliance; Ramp Warning - Juniper 3800 Hardware Manual

Juniper Secure Analytics 3800 Hardware Guide
Related
Documentation

Chassis Lifting Guidelines for the JSA3800 Appliance

Related
Documentation

Ramp Warning

Supported Platforms
70
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Ramp Warning on page 70
Rack-Mounting Warnings on page 71
Grounded Equipment Warning on page 75
Maintenance and Operational Safety Guidelines and Warnings on page 83
The weight of a fully loaded JSA3800 appliance is approximately 37 lb (16.8 kg). Observe
the following guidelines for lifting and moving the JSA3800 appliance:
Before installing JSA3800, read the guidelines in
for the JSA3800 Appliance" on page
Before lifting or moving the JSA3800 appliance, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Ramp Warning on page 70
Installation Instructions Warning on page 69
Rack-Mounting Warnings on page 71
Grounded Equipment Warning on page 75
Maintenance and Operational Safety Guidelines and Warnings on page 83
JSA1500, JSA3500, JSA5500, JSA7500
WARNING: When installing the device, do not use a ramp inclined at more
than 10 degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10
graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus ylittää 10 astetta.
Attention Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10
degrés.
"General Site Installation Guidelines
15.
Copyright © 2015, Juniper Networks, Inc.