Changing The Machine Operation Mode - Canon MG2400 Series Online Manual

Changing the Machine Operation Mode

If necessary, switch between various modes of machine operation.
The procedure for configuring Custom Settings is as follows:
Custom Settings
1. Open the printer driver setup window
2. Make sure that the machine is on, and then click Custom Settings on
the Maintenance tab
The Custom Settings dialog box opens.
Note
If the machine is off or if communication between the machine and the computer
is disabled, an error message may appear because the computer cannot collect
the machine status.
If this happens, click OK to display the most recent settings specified on your
computer.
3. If necessary, complete the following settings:
Align heads manually
Usually, the Print Head Alignment function on the Maintenance tab is set to
automatic head alignment, but you can change it to manual head alignment.
If the printing results are unsatisfactory even after you execute automatic head
alignment, execute manual head
Check this check box to perform the manual head alignment. Uncheck this check box
to perform the automatic head alignment.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in
the Orientation.
To rotate the print data 90 degrees to the left during printing, select this item. To
rotate the print data 90 degrees to the right during printing, clear this item.
Important
Do not change this setting while the print job is displayed in the print wait list.
Otherwise, characters may be omitted or the layout may become corrupt.
alignment.
110