Kenwood TTM610 Instruction Manual page 6

3 Adjust the slot width to suit the
sandwich cage
Take care not to touch the
fascia panel, it may be hot.
4 Lower the carriage lever
place the sandwich cage into the
slot .
5 Move the browning control to the
desired setting.
6 Select the desired button. The
selected button and cancel button
lights will illuminate, an audible beep
will be heard and toasting will begin.
l
In order to monitor the progress of
the toasting, the sandwich cage can
be lifted up without cancelling.
7 To stop toasting at any stage, press
the cancel button. The toaster will
emit an audible beep to indicate
toasting is cancelled and the button
lights will go out.
8 When toasting has finished the
toaster will emit an audible beep and
the button lights will go out and the
toasting will stop. The food item will
NOT pop up.
9 Leave the toasted food item to stand
for 1 minute inside the toaster before
serving.
10 Remove the sandwich cage, then
open it up and tip the food item onto
a plate.
11 After using, unplug the toaster.
CAUTION:
l
The sandwich cage will be
very hot, ensure it is placed
on a heat resistant surface
and take care when handling.
l
Ensure ingredients are piping
hot throughout before serving.
l
Take care when biting into the
food items as the fillings can
be very hot.
. CAUTION:
and
6