Remote Control - Pioneer Elite SX-N30 Operating Instructions Manual

Names and functions of parts

Remote control

Í STANDBY/ON button: Press this button to turn the
unit on or put it in standby mode.
INPUT SELECTOR buttons: Use these buttons to
select the source to playback.
Skip (:/9) buttons (*)
Search (6/5) buttons (*)
REPEAT button: Turns repeat play on and off and
selects the mode. (*)
SPEAKERS A/B button: Select the terminals to
output audio from between SPEAKERS A/B.
Direction ( / / / )/ENTER buttons: Select items
with the direction buttons and press the ENTER button
to confirm.
SETUP button: Used to display the setup menu.
CH (i/j) buttons: Select registered stations.
Number buttons
DISPLAY button: Change the information shown.
DIMMER button: Use this button to switch the display's
brightness between normal, moderately dark and dark.
REMOTE MODE MAIN button: Switches the remote
control to the mode for operating this unit.
REMOTE MODE ZONE 2 button: For use when the
unit is connected with a pre-main amplifier, a power
amplifier or a subwoofer with built-in amplifier in a
separate room and sound is played there.
Pause (;) button (*)
Playback (1) button (*)
Stop (∫) button (*)
RANDOM button: Plays tracks in the folder or playlist
(DLNA) randomly. (*)
MENU button: Press this button to display the menu.
RETURN button: Returns the display to the previous
state during setting or operation.
VOLUME (i/j) buttons
AUDIO button: Use this button to adjust sound quality,
etc.
MUTE button: Temporarily mutes audio.
CLR button: Use this button to clear the characters
that you have input.
SLEEP button: Press this button to set the sleep timer.
*
Operate with USB storage device play or the home network
feature (DLNA, Home Media).
Remote control sensor
Batteries
(AAA/R03)
*
If you do not use the remote control for a long time, remove the
batteries to prevent leakage. Note that keeping consumed
batteries inside may cause corrosion resulting in damage of the
remote control.
It
De
5 m (Approx.
16 ft.) or less
9