Towing And Tow-Starting; Installing The Towing Eye - Mercedes-Benz 2012 C-Class Operator's Manual

Hide thumbs Also See for 2012 C-Class:
Table of Contents

Advertisement

engine is not running. You will need more
force to steer and brake, you may have to
depress the brake pedal with maximum force.
Before towing away, make sure that the
steering can be moved and is not locked.
If you tow or tow-start another vehicle, its
weight must not exceed the maximum
permissible gross vehicle weight of your
vehicle.
G
WARNING
The vehicle is braked when the HOLD function
or DISTRONIC PLUS is activated. Therefore,
deactivate HOLD and DISTRONIC PLUS if the
vehicle is to be towed.
It is better to have the vehicle transported
than to have it towed.
!
You may only tow the vehicle a maximum
distance of 30 miles (50 km). A towing
speed of 30 mph (50 km/h) must not be
exceeded.
For towing distances over 30 miles
(50 km), the vehicle must loaded onto a
transporter.
!
Only secure the tow rope or tow bar at the
towing eyes. Otherwise, the vehicle could
be damaged.
!
Do not use the towing eye for recovery,
as this could damage the vehicle. If in
doubt, recover the vehicle with a crane.
!
When towing, pull away slowly and
smoothly. If the tractive power is too high,
the vehicles could be damaged.
!
Do not tow with sling-type equipment.
This could damage the vehicle.
!
On vehicles with KEYLESS-GO, use the
SmartKey instead of the Start/Stop
button. Turn the SmartKey to position 2 in
the ignition lock and shift the automatic
transmission to N. Then, turn the SmartKey
back to 0 and leave it in the ignition lock.
The automatic transmission must be in
position N when the vehicle is being towed.

Towing and tow-starting

The battery must be connected and charged.
Otherwise, you:
cannot turn the SmartKey to position 2 in
R
the ignition lock
cannot shift the automatic transmission to
R
position N
Release the selector lever lock manually to
move it out of position P (
i
Before the vehicle is towed, switch off the
automatic locking feature (
could otherwise be locked out when
pushing or towing the vehicle.
Installing/removing the towing eye

Installing the towing eye

X
Remove the towing eye from the vehicle
tool kit (
Y
page 292).
G
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes
are located in the bumpers. They are at the
front and at the rear, under the covers.
I n f o r ma t i o n P r o v i d e d b y :
303
Y
page 149).
Y
page 78). You
Z

Advertisement

Table of Contents
loading

Table of Contents