Display Message - Mercedes-Benz 2012 C-Class Operator's Manual

Display messages
b
AUTO Lamp Function
Inoperative
b
Switch Off Lights
Adaptive Highbeam
Assist Inoperative
Adaptive Highbeam
Assist Currently
Unavailable See
Operator's Manual
Engine
Display messages
+
Check Coolant
Level See
Operator's Manual
G
WARNING
Do not spill antifreeze on hot engine parts. Antifreeze contains ethylene glycol which may burn
if it comes into contact with hot engine parts. You could be seriously burned.
! The coolant level is too low. Avoid making long journeys with too little coolant in the cooling
system. The engine will otherwise be damaged.
The display messages and the corresponding symbol that indicate that the coolant level is
too low must not be ignored.
Possible causes/consequences and M Solutions
The light sensor is defective.
X
Visit a qualified specialist workshop.
The lights are still switched on when you leave the vehicle. A
warning tone also sounds.
X
Turn the light switch to c or Ã.
Adaptive Highbeam Assist is faulty.
X
Visit a qualified specialist workshop.
Adaptive Highbeam Assist is deactivated and temporarily
inoperative. Possible causes are:
the windshield in the camera's field of vision is dirty.
R
visibility is impaired due to heavy rain, snow or fog.
R
X
Clean the windshield.
If the system detects that the camera is fully functional again, the
Adaptive Highbeam Assist Now Available
is shown.
Adaptive Highbeam Assist is operational again.
Possible causes/consequences and M Solutions
The coolant level is too low.
X
Add coolant, observing the warning notes when doing so
( Y page 280).
X
If coolant needs to be added more often than usual, have the
engine coolant system checked at a qualified specialist
workshop.
I n f o r ma t i o n P r o v i d e d b y :
Display messages

display message

225
Z