Operation - GoECOlife GMC225Pi PLATINUM SERIES User Manual

operation

Please read operating instructions before putting shredder into operation.
To Power On:
1. Connect the power cord to any standard 120V AC, 60Hz outlet.
2. Toggle the main power switch on the rear panel to the ON position.
For Normal Operation:
3. Press the green GoECO™ power saving switch to turn ON the shredder.
It will run automatically for 2 seconds. The LED will light green indicating "ON". The
shredder is now in AUTO mode and ready to accept paper.
4. Feed up to the maximum allowed sheets of paper for shredding into the paper
feeding throat.
To Put Into Reverse Mode:
5. Press the "R" button on the control panel. The shredder is now in Reverse mode, and the
motor will move in reverse to push out paper.
To Put Into Forward Mode:
6. Press the "F" button on the control panel. The shredder is now in manual forward mode,
and the motor will move forward to shred paper.
GoECO Power ON
™
Reverse
Forward