Operation - GoECOlife GMC120D Manual

http://www.monomachines.com/

Operation

Please read operating instructions before putting shredder into operation.
TO POWER ON:
1. Connect the power cord to any standard 120V AC, 60Hz outlet.
2. Toggle the power switch to the ON position.
FOR NORMAL OPERATION:
3. Press the green power saving switch to turn ON
the shredder. It will clean the paper/run automatically for the shredder. It will clean the paper/run automatically for
2 seconds. Depending on the model of the shredder,
the LCD will display either "ON" or "AUTO". The
"GoECOlife" logo will light on and the shredder is
then in AUTO status. (The "GoECOlife" logo does
not light up on the GMC120D model.)
ON
For Commercial Shredders:
I II
4. Feed up to the maximum allowed sheets of paper for shredding into the
paper feeding throat.
5. When you press the "INFO" button, it will speak from 1st voice
assistance to the last one (Auto / Reverse / bin full / door open / overload
/ overheat). It will skip to the next message each time you press the
"INFO" a button until the last message. Press the "speaker" shape
button to adjust the volume.
16
http://www.monomachines.com/
For More Info
Click Here --->
AUTO
or
III
For Commercial Shredders:
IV V VI