Technical Specifications; How To Use Your Shredder - GoECOlife GMC225Pi PLATINUM SERIES User Manual

22-sheet microcut shredder
PLATINUM SERIES™

technical specifications

model GMC225Pi
cutting style microcut
shred size 0.12" x 0.35" (3 x 9mm)
sheet capacity 22 sheets
shred speed max sheet capacity 7.5 ft/min (2.2 m/min)
intake throat width 9.06" (230mm)
dimensions (l x w x h) 17.5" x 13.9" x 25.9" (355 x 446 x 658mm)
weight 44.5 lbs (20.2 kg)
basket capacity 7.8 gallons (29.7 liters)
run time (min) 20 ON / 60 OFF
noise level (motor) 60 dB

how to use your shredder

Please read operating instructions before putting shredder into operation.
Setup Instructions:
1. Connect the power cord to any standard 120 volt AC outlet. For pluggable equipment,
the socket-outlet shall be installed near the equipment and shall be easily accessible.
2. Toggle the main power switch on the rear panel to the ON position.
3. Press the green GoECO™ power saving switch to turn ON the shredder.
4. Insert paper to activate.
Setup Cautions:
1. All shredders have very sharp, exposed blades on the underside. Please use care when
mounting the shredder on to the wastebasket.
2. Make sure power cord is not damaged in any way and that the outlet is properly functioning.
3. It is normal for residual lubricant in the motor to burn off during the first several
extended uses of your shredder. Should you notice a slight burning odor or the presence
of small wisps of smoke during the first several extended uses, you may continue using
the shredder. If either symptom continues to occur after repeated use, please
contact technical support for assistance.
7
2
product warranty cutter warranty