Technical Specifications; How To Use Your Shredder - GoECOlife GMW104P Series User Manual

10-sheet microcut shredder
LIMITED EDITION

technical specifications

model GMW104P
cutting style microcut
shred size 0.20" x 0.39" (5 x 10mm)
sheet capacity 10 sheets
shred speed max sheet capacity 6.6 ft/min (2.0 m/min)
intake throat width 8.66" (220mm)
dimensions (l x w x h) 12.8" x 8.5" x 16.9" (325 x 215 x 428mm)
weight 6.0 lbs (13.3 kg)
basket capacity 3.5 gallons (13.3 liters)
run time (min) 5 ON / 60 OFF
noise level (max) 62 dB

how to use your shredder

Setup Instructions:
1. Mount the shredder correctly to the basket.
2. Connect the power cord to any standard 120 volt AC outlet. For pluggable equipment,
the socket-outlet shall be installed near the equipment and shall be easily accessible.
3. Move switch to ON position.
4. Insert paper to activate.
Setup Cautions:
1. All shredders have very sharp, exposed blades on the underside. Please use care when
mounting the shredder on to the wastebasket.
2. Make sure power cord is not damaged in any way and that the outlet is properly functioning.
3. Never attempt to shred sealed envelopes. Doing so may damage the shredder. Always
remove and unfold envelope contents completely before attempting to shred. NEVER
shred envelopes, labels or anything with glue or any sticky substance as this will lead to
paper jams.
4. It is normal for residual lubricant in the motor to burn off during the first several
extended uses of your shredder. Should you notice a slight burning odor or the presence
of small wisps of smoke during the first several extended uses, you may continue using
the shredder. If either symptom continues to occur after repeated use, please
contact technical support for assistance.
1
product warranty