Table of Contents
Advertisement
Initial setup
The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the initial setup
process, including the selecting the menu language, scanning channels, connecting to the network, and more. During each
step, either make a choice or skip the step. You can manually perform this process at a later time in the
- If you connect any device to
automatically.
- If you do not want to select
- If you don't require a live television signal, please select
Password Change
System
>
Change PIN
Changing the TV's password.
1. Run
and then enter the current password in the password field. The default password is "0-0-0-0".
Change PIN
2. Enter a new password and then enter it again to confirm it. The password change is complete.
- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to "0-0-0-0":
In Standby mode:
Selecting the video source
You can select a connected external device using the
For example, to switch to a gaming console connected to the second HDMI connector, press
select
to change the input signal to HDMI mode. Connector names may vary depending on the model.
HDMI2
The following options are available in the
Button
TOOLS
Select a port connected to an external device, and press and hold the Enter button. The following functions are available:
- Available options for each connector may vary.
Edit Name
Rename devices connected to the TV for easier identification of external sources.
For example, you can designate a computer connected to the TV via an HDMI-DVI cable as
Alternatively, simply designate a computer connected to the TV via an HDMI cable as
You can also designate an AV device connected to the TV via an HDMI-DVI cable as
Information
View detailed information about the connected devices.
Anynet+ (HDMI-CEC)
Displays a list of Anynet+ (HDMI-CEC)-compliant devices that are connected to the TV.
- This option is only available when
Disconnect USB Device
Used to safely remove a USB device connected to the TV.
- This option is only available when a USB device has been selected.
[UH5500-5570-XY]BN68-06094A-ENG.indb 12
before starting the installation, the
HDMI1
Set-top box
, please select
→
→
→
→
MUTE
8
2
4
POWER
screen:
Source
Anynet+ (HDMI-CEC)
Channel Source
Aerial
.
No channels (display only)
(On)
SOURCE
button.
is
.
On
English - 12
>
System
Setup
will be changed to
Set-top box
.
. From the
SOURCE
Source
DVI PC
.
PC
.
.
DVI Devices
menu.
list,
2014-04-16
5:43:57
Hide quick links:
Advertisement
Table of Contents
