Table of Contents
Advertisement
OPERATING MANUAL AND USER GUIDE
Important Warnings And Safety Instructions
• Read these instructions
• Follow these instructions
• Keep these instructions for future reference
• Heed all warnings
• Do not use this system near water or moisture
• Clean only with a dry cloth
• Install in accordance with these Wharfedale Pro operating instructions
• Follow the manufacturers operating instructions for all peripheral devices such
as amplifiers and processors
• Do not install near heat sources such as radiators, heat registers, stoves or
any other apparatus that produces heat (For example lighting systems and
amplifiers)
• Use only accessories specified or supplied by Wharfedale Pro
• Do not use shielded microphone/instrument cables to connect amplifiers and
speakers, use only approved speaker cables with proper connectors
• Use caution with placement and operation of this speaker system, permanent
hearing damage can be caused by prolonged exposure to excessive sound
pressure levels
• Refer all servicing to qualified professionals. Servicing is required when the
loudspeaker has been damaged in any way, such as impact damage, liquid
ingress or foreign object damage. In addition the loudspeaker should be
referred to qualified service personnel if there is any kind of malfunction.
Rigging, suspending and mounting should only be attempted by
experienced qualified professionals. Incorrect usage can result in
damage to equipment and property, injury and even death. Under
no circumstances should you attempt to rig, suspend or mount
these speakers unless you are fully qualified and certified to do
so by relevant local, state and national authorities. If you are not
properly qualified or do not know of pertinent regulations consult
qualified personnel for advice. Consult a structural engineer
before suspending a speaker system and ensure that the total
weight of your system can be held by the truss or mounting
surface.
Inspect all mounting hardware before your line array is flown. If there is any
damage or distortion to any mounting hardware do not fly the array until
any damaged hardware is repaired or replaced. Only use Wharfedale Pro
supplied Quick Release Pins, contact your Wharfedale Pro Distributor if any
Quick Release Pins are lost or damaged.
Advertisement
Table of Contents
