Pppoe - D-Link DWR-921 User Manual

Section 4 - Configuration
Username:
Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the password in the
next box.
Service Name: Enter the ISP Service Name (optional).
MTU: Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP.
DNS Setting: Select either Obtain DNS server address automatically or Use the
following DNS address.
DNS Addresses: Enter the primary and secondary DNS server addresses.
Enable DHCP-PD: Check to enable the DHCP-PD feature.
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-
Displays the router's LAN link-local address.
Local Address:
Enable
Check to enable the autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC + Stateless
DHCPv6.
Type:
Router Enter the IPv6 address lifetime (in seconds).
Advertisement
Lifetime:
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-921 User Manual

PPPoE

27