Canon i-SENSYS MF3010 User Manual page 17

Miscellaneous precautions
The maximum power consumption of the machine is 960 W or less.
Electrical noise or a dramatic voltage drop may result in improper operation and irretrievable data loss.
Installation Requirements
A location that has sufficient free space
A location that has good ventilation
A location that has a flat, even surface
A location that can withstand the weight of the machine
IMPORTANT
Do not install the machine at the following locations, as this may result in product damage.
A location subject to dramatic temperature and humidity changes
A location subject to condensation
A poorly ventilated location
(If you perform high-volume printing for an extended period of time using the machine placed in a poorly ventilated
room, you may be exposed to ozone and odors generated by the machine, as well as chemical particles released
during printing.
It is highly important that proper ventilation be assured at the installation location.)
A location near equipment that generates magnetic or electromagnetic waves
A laboratory or location where chemical reactions occur
A location exposed to salt air, corrosive gases, or toxic gases
A location where the floor is covered with a carpet or floor mat, to cause the machine to slide easily over or sink
into the carpet or mat from its weight
Installation Space
Required installation space
Maintenance and Inspections
IMPORTANT
Follow the instructions written on the caution label attached to this machine.
Avoid shaking or applying a shock to the machine.