Installation And Handling - Canon i-SENSYS MF3010 User Manual

Installation and Handling

To make sure safe and trouble-free operation, the following installation requirements must be observed.
Read the instructions carefully before installing the machine.
Temperature and Humidity Conditions
Power Supply Requirements
Installation Requirements
Installation Space
Maintenance and Inspections
Customer Support
IMPORTANT
Important Safety Instructions
Be sure to read "Important Safety Instructions" before installing the machine.
Temperature and Humidity Conditions
Temperature range: 10 to 30°C
Humidity range: 20 to 80 % RH (no condensation)
IMPORTANT
Protecting the machine from condensation
Allow the machine to adjust to the installation environment (room temperature and humidity) for at least two hours
before using, to prevent condensation from forming inside the machine when:
the installation location is warmed up too rapidly.
the machine has been moved to a hot, humid location from a cool, dry location.
If water droplets (condensation) form inside the machine, this may result in paper jams or poor print quality.
To use an ultrasonic humidifier
We recommend that purified or impurity-free water be used when using an ultrasonic humidifier.
The use of tap water or well water may result in contamination by impurities in the air, as well as print quality degradation
due to water trapped inside the machine.
Power Supply Requirements
220 to 240 V, 50/60 Hz
IMPORTANT
Precautions when connecting the power cord
Do not connect the machine to an uninterruptible power source.
Make sure to plug an AC power plug into the AC outlet. Do not use the other sockets of the AC outlet.
Do not plug the power plug into the auxiliary outlet on a computer.
Do not connect the machine and any of the following devices to the same AC outlet.
Copy machine
Air conditioner
Shredder
Equipment that consumes a large amount of electricity
Equipment that generates electrical noise
Wait for at least five seconds to plug the power cord into the outlet again after the cord has been unplugged.
030E-008