Cleaning; Body Exterior; Exterior Paintwork; Body Interior - Dennis POINTER Operation Manual

Cleaning

Body Exterior

Exterior Paintwork

CAUTION
All cleaning materials must
be used strictly
accordance with
manufacturers instructions.
Use neutral soaps
cleaners only. When using
automatic washers, ensure
plenty of water is used and
that brush pressure is not
excessive.
Do not clean with dry cloths.
Do not use pressure washers.
Wash the paintwork regularly, either
with lukewarm water and a soft sponge,
or by automatic washer.
Remove all contaminants
particularly from behind mouldings and
at joints using a normal hose pipe only.
Remove oil, diesel, tar and sap stains
with non-abrasive liquid polish.
Repair surface fractures,
scratches, stone chips, etc, promptly.

Body Interior

All cleaning materials must
in
be used
the
accordance
manufacturers instructions.
and
Use neutral
cleaners only. Do not use
abrasive cleaners or polishes.
Do not use solvents: white
spirit, petrol, thinners, etc.

ABS

etc,
Do not use Acetone for
cleaning ABS as this will
affect the surface of the ABS
upon exposure for just a
short period and will lead to
discolouration.
deep
CAUTION
strictly in
with the
soaps and
CAUTION
Sponge clean regularly with soap and
warm water.
The recommended composition of any
soaps used should be as shown:
• Less than 20% Anionic Surfactant.
• Less than 15%
Surfactant.
• Non-Caustic Alkali 2-6% maximum.
• PH level of between 10 and 12.
• No Solvents.
• No Ammonia.
• No Caustic Alkali.
The detergent can be applied neat to a
wet cloth/scrub pad.
If extremely stubborn marks are found
Isopropyl Alcohol can be applied using
a cloth. The surface must be rinsed
with either hot or
immediately after use.
Non Ionic
cold water
47