Getting Started - Sony WEGA KV-BZ212 Operating Instructions Manual

x Getting Started
Confirm
Select
4
Step 1
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components
(see page 8).
Step 3
Plug in the power cord, then press ! on the TV to turn
it on.
Note
• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a malfunction.
Step 4
Set up the TV by following the instructions of the
"Initial Setup" menu (see page 5).
End