Changing The "Setup" Setting - Sony WEGA KV-BZ212 Operating Instructions Manual

x Changing the "Setup" setting
The "Setup" menu allows you to adjust settings below.
1
Press WEGA GATE and select "Settings".
2
Press V or v to select the "Setup" icon (
3
Press V or v to select the desired item (e.g., "Language"), then press
Select
"Language"
"Video Label"
"Color System"
"Factory Settings"
Note
• The color system "SECAM" is available for KV-BZ212M50 only.
18
To
change the menu language.
Press V or v to select either "English" or "
.
label the connected equipment.
(1) Select "Video Input" and press
input you want to label, then press
(2) Select "Label" and press
label options: "Video 1"/"Video 2"/"DVD", "VCR", "SAT",
"Game" or "Edit"*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press
select the color system.
Press V or v to select either "Auto", "PAL", "SECAM",
"NTSC3.58" or "NTSC4.43", then press
"Auto".
reset your TV to factory settings.
Press and press V or v to select "Yes", then press
To cancel, select "No", then press
), then press .
" (Chinese), then press
. Press V or v to select the
.
, then press V or v to select the
. Normally, set this to
.
.
.
.