Recording Through A Dv Input Jack - Samsung DVD-VR470M User Manual

DV
< Move s Ok
Downloaded From Disc-Player.com Samsung Manuals
M
You may control the Camcorder using the IEEE1394 (DV) interface.
Follow these directions to record onto a disc or tape from a
camcorder that has a DV output jack.
1.
2.
3.
4.
5.
    ►  
6.
7.
Exit
M

You can not change the recording mode and the programme while
recording.

Recording will stop automatically if there is no free space left for
recording.

Up to 99 titles can be recorded onto a DVD-RW/-R disc.

If the power interrupted due to power failure or other reasons, the
title being recorded will not be saved onto the disc.

Recording will stop automatically if a copy protected image is
selected.

Do not use DVD-R authoring discs with this unit.

Also refer to the user manual for your External Devices when
recording from external equipment using the Audio/Video cable or
scart cable.
Recording through a DV Input jack (DVD-VR475M only)
Connect the DV output jack of your camcorder to the DV input jack on
the front of your DVD Recorder & VCR using a DV cable.
Power on your DVD Recorder & VCR and switch to DV mode by
pressing the INPUT SEL. button on the remote control.
Press the REC MODE button repeatedly to select the recording Mode
(quality).
➞ HQ ➞ HSP ➞ SP ➞ LSP ➞ ESP ➞ LP ➞ EP ➞ SLP
If the input is set to DV, a playback/record menu that enables
camcorder control appears on the top of the screen.
Select the Playback related icons on the upper part of the screen to
playback the camcorder and fi nd the starting position for dubbing.
To start recording, Press the ◄► buttons to select REC (l) icon in the
top side of the screen, then press the OK button.
You can press the REC button on the remote control to start recording
Press the STOP button on your DVD Recorder & VCR when the
recording is fi nished.

Some camcorders may not work with your DVD Recorder & VCR
even if they have a DV output jack.

Also refer to the user manual for your camcorder when recording
through a DV jack.

To display playback related icons on the screen, press any direction
button on the remote control.

Playback related icons do not operate on the VCR view.
To record onto a video tape from a camcorder, you should fi nd the
starting position by using your camcorder.
Then press the REC button on the remote control of DVD Recorder
& VCR.
English - 59