Table of Contents
Advertisement
Quick Links
TRIUMPH 430
SELF-CONTAINED CARPET EXTRACTOR
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell
all operators to read the book. If you do not follow the
instructions, you can cause an injury or damage equipment,
furniture or buildings.
For new books write to:
Pacific Steamex, Inc.
2259 S. Sheridan
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately
with the delivering carrier.
OPERATING & MAINTENANCE
READ THIS BOOK
The contents of this manual are based on the latest product
information available at the time of publication. Pacific
Steamex reserves the right to make changes or improve-
ments to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING INFORMATION:
INSTRUCTIONS
MODEL_______________________________
SERIAL NUMBER________________________
PART NUMBER _________________________
DATE PURCHASED ______________________
Advertisement
Table of Contents
Related Manuals for Pacific Steamex TRIUMPH 430
Summary of Contents for Pacific Steamex TRIUMPH 430
- Page 1 TRIUMPH 430 SELF-CONTAINED CARPET EXTRACTOR OPERATING & MAINTENANCE INTRODUCTION INSTRUCTIONS READ THIS BOOK This operator’s book has important information for the use The contents of this manual are based on the latest product and safe operation of this machine. Read this book care- information available at the time of publication.
-
Page 2: Grounding Instructions
12” aluminum vacuum head for better extraction. The two-stage vacuum motor on the Triumph 430 is capable of 80 inches of water lift. The Triumph 430 extracts virtually all of the dirty solution from the carpet fibers, which dramatically reduces drying time. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING : To reduce the risk of fire, electric shock, or injury: 1. You must have training in the operation of this machine before using it. 2. -
Page 4: Operating Procedures
OPERATING PROCEDURES WARNING! For the safe operation of this machine OPERATION follow the instructions given in this booklet and the train- The following procedures are intended to describe and de- ing given by your supervisor. Failure to do so can result tail proper operation of your machine. -
Page 5: After Each Use
Authorized Service Center. the vacuum switch on. SERVICING The TRIUMPH 430 self-contained extractor is designed and 5. Make sure the brush assembly lift lever is locked in the manufactured to provided years of trouble free service with raised position. - Page 6 It should turn approximately 90 with little effort. If it twists more than 90 retighten the belt. Additional service information is available from your local Pacific Steamex Distributor or through our Technical Service Department.
- Page 8 Triumph 430 Drawing 1 03/01...
- Page 9 Triumph 430 Drawing 1 ITEM PT # DESCRIPTION Qty. ITEM PT # DESCRIPTION Qty. 204170 Hose - Vac Head, 17″ W106D Nut - 10-24 Hex W124D Washer #10 Int. Tooth 3698 Cuff 204171 962103 Bolt 3/8-16 x 2-1/4 HHCS Hose - Vac Short, 6″...
- Page 10 Triumph 430 Drawing 2 07/01...
- Page 11 Triumph 430 Drawing 2 Item Part No. Description Qty. Item Part No. Description Qty. 204182 Hose – 12” Reinforced W353D Screw 1/4-20 x 1/2" FHP 203359 Fitting – 3/8 Hose Barb 980032 Washer 203302 Quick Connect – ¼ Male A13438...
-
Page 12: Warranty Policy
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific Steamex Inc. at the address listed herein for the location of the nearest Pacific Steamex Inc. repair center or agent or for other instructions pertaining to your warranty difficulty.