Refrigerator Shelf - Sharp SJ-MB300S Operation Manual

Plasmacluster
The plasmacluster automatically starts operating when the
refrigerator is powered on.
To cancel operation
Press the plasmacluster button.
To start operation
Press the plasmacluster button again. (The light turns on).
Notes about PLASMACLUSTER operation
The ionizer inside your refrigerator releases clusters of
ions, which are collective masses of positive and
negative ions, into the freezer and refrigerator
compartments. These ion clusters inactivate airborne
mold fungus.
mold
fungus
• There may be a slight odors in the refrigerator. This is
the smell of ozone generated by the ionizer. The
amount of ozone is minimal, and quickly decomposes
in the refrigerator.
How to make the ice
1
Fill the ice cube tray with
water to the water line.
2
When the ice is made,
twist the ice cube tray to
take out the ice.
Ice storage area

Refrigerator shelf

The height can be adjusted.
Low
Rail
Shelf
For how to remove the shelf, please refer to the section of
CARE AND CLEANING.
6
Plasmacluster Display
OFF
Water line
Frozen foods area
High
Wine bar
(Only for SJ-MB300S)
It is set to "Fresh" temperature zone at first. A cheese or
the dessert can be stored. If the temperature zone is
switched to "Wine", the red wine can be chilled to the
proper temperature.
Temperature zone
Preset temperature Approx. 3°C
Temperature
adjustment
Switch it to the wine temperature zone
1
Press the select button and
select the icon shown in the
figure.
2
Press button.
The indicator indicates the setting
position of the temperature
adjustment.
(Current setting position blinks)
If you want to adjust the
temperature, implement the step
3 within approx. 15 seconds.
3
Press button or button and select the desired
setting position.
The temperature rises by
approx. 2°C.
It is suitable for ripe wine.
The temperature drops by
approx. 2°C.
It is suitable for fresh new
wine.
• When press the button, only the indicator changes, but
the displayed temperature figure does not change.
• The display returns to the normal display in approx. 15
seconds.
NOTE
If the setting is changed, the actual temperature in the
•
compartment does not change quickly. It takes approx. 3 to 5
hours to rise to approx. 15°C. If the temperature is set to the
wine temperature zone, the power consumption increases by
approx. 0.6kWh/24h.
Reset the temperature to the fresh
temperature zone
1
Press the select button and
select the icon shown in the
figure.
2
Press button.
• The display returns to the
normal display in approx. 2
seconds.
Fresh Wine
Approx. 15°C
Can be adjusted
Fixed
(approx. ±2°C)
Blinking
Blinking
15°C is
displayed
Blinking
Blinking
Blinking
3°C is
displayed
The icon
disappears