Table of Contents
Advertisement
4 (30)
Glossary
Algorithm code
Application code
Asic-Boot
Bootstrap code
DCT3
DCT4
FLASH
FPS-8
IR
TSS4
Secondary bootstrap
SRAM
WinTesla
Phoenix
Flash programming algorithm code. This code runs in the target system and it
must support used Flash type and phone hw. The prommer box can contain
several algorithm codes; each code supports one or more different Flash
devices. E.g. u_intel.fia supports a number of Intel flash chips.
Software which FPS-8 prommer box MCU runs.
See Bootstrap code
Code that resides in target hardware, usually in ASIC ROM or in MCU internal
ROM. Bootstrap code loads secondary bootstrap code into target RAM.
Third generation Digital Core Technology.
Fourth generation Digital Core Technology.
Nonvolatile electronically erasable memory. Both phone and prommer hw
have Flash memory (See prommer main board).
The name of the FLASH prommer
Infrared
Test and Service Software 4
Second bootstrap code, loads algorithm code into target RAM. Executed in
target hardware. E.g. u_2nd.fia
Random access memory, data is lost when power is lost. FPS-8
prommer box can have 64 MB of SRAM (See picture of FPS-8
main board).
Service Software for DCT-3 generation phones
Service Software for DCT-4 generation phones
th
Generation
Advertisement
Table of Contents
