Unloading The Instax Mini Film Pack - FujiFilm instax mini70 User Manual

Instant camera
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Taking Pictures (Continued)
EN
Every time you take a photo, the number on the film
counter decreases from "10" to reflect the number of
remaining photos, and "0" is displayed when you have
used up the film pack.
When the film has been ejected (the camera stops making
a sound), grasp the edge of the film, then take it out.
• For details on taking out the film, refer to the instructions
and warnings on the FUJIFILM INSTAX mini film pack.
• The developing time is approximately 90 seconds. (The
time varies depending on the ambient temperature.)
When finished using the camera, always switch off to
maintain battery life. If the camera is left switched on for
5 minutes without being used, it will automatically switch
off.
12

Unloading the INSTAX mini film pack

When "0" is displayed on the film counter, unload the film
pack following the procedure below.
~
Press down the back cover lock to open the back
cover.
Ÿ
Grasp the rectangular holes on the film pack, then
pull it out straight.

Advertisement

Table of Contents
loading

Table of Contents