Play; Play A Disc - Philips FWD410 User Manual

3
Select ([Video Setup]).
4
Select [Progressive] -> [On], and then
press OK.
» The progressive setup is complete.
Note
•
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
•
If no picture is displayed, turn off the progressive scan
mode as follows:
•
1) Press to open the disc compartment.
•
2) Press .
•
3) Press AUDIO.
5
Press SETUP to exit the menu.
» You can now turn on the progressive
scan mode on the TV (see the TV user
manual).
Note
•
During play, when the progressive scan mode is on for
both this unit and the TV, distorted picture may display.
In this case, turn off the progressive scan feature on
both this unit and the TV.
EN
16
FWD410_UM_98_EN_V2.0.indd 16

5 Play

Caution
•
Risk of damage to the unit! During play, never move
the unit.

Play a disc

Caution
•
Never look at the laser beam inside the unit.
•
Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
•
Never put any objects other than discs into the disc
compartment.
1
Press DISC to select the disc source.
2
Press .
» The disc tray opens.
3
Place a disc onto the tray and press again
to close the disc tray.
» Make sure that that the label side faces
up.
4
If play does not start automatically, select a
title/chapter/track, then press
play.
• To stop play, press .
• To pause or resume play, press
• To skip to the previous/next title/
chapter/track, press
Tip
•
To play a locked DVD, enter the 4-digit parental control
password.
to start
.
/ .
11/29/2013 4:15:53 PM