Using The Safety Brake; Locking The Front Wheels - CONCORD Wanderer Manual

Release levers (13) are located to the left
and right of the handlebar (02).
To release, press and hold the safety
push-buttons on the inside of the
release levers (13) and pull both of the
release levers upwards.
Fold the handlebar (02) downwards.
Now use the strap on the folding mechanism to pull the CONCORD
WANDERER upwards until it is completely folded together.
Now use the fastening strap and its
transportation lock (12) to secure the
CONCORD WANDERER for safe carriage.
30

_ USING THE SAFETY BRAKE

To enable the safety brake on CONCORD
WANDERER, press down the foot lever (17) on
the right-hand rear wheel.
WARNING!
If the parking brake of the pram
is activated, make sure that the parking brake is
correctly engaged. It is also necessary to slightly
move the pram in order to completely activate the
parking brake.
To release the safety brake, lift up the foot lever
(17) on the right-hand rear wheel.

_ LOCKING THE FRONT WHEELS

To lock the front wheels of the
CONCORD WANDERER in the
direction of travel, position the front
wheels so they point backwards
and press the locking buttons down
(10).
To release the lock, lift the locking
buttons (10) upwards.
31