Table of Contents
Advertisement
4. Push the clips on each side of the RAM slot outward.
5. Align the two depressions on the base of the DIMM with the
protrusions inside the RAM slot to determine the position of
attachment.
6. Insert one end of the DIMM into the slot and push until the
retaining clip comes up.
7. Push the other end of the DIMM into the slot until the clip
comes up to retain the memory module securely.
c
Caution:
Do not remove any modules from the circuit board.
Otherwise, the printer will not work.
Installing the Options
15
Advertisement
Table of Contents
