Carton Inventory
Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model
purchased. If anything is missing, carefully check the
Door Control Button
Chain and Cable
Trolley
"C" Wrap (2)
Safety Reversing Sensor
Mounting Bracket
With Square Holes (2)
Cable
Pulley Bracket
Rail
Center Section
Door Bracket
Header Bracket
Safety Reversing Sensor
Mounting Bracket
With Slot (2)
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
packing material. Parts may be stuck in the foam.
Hardware for assembly and installation is shown on
the next page. Save the carton and packing material
until installation and adjustment is complete.
Three-Function Remote Control
with Visor Clip (2)
Sprocket Cover
Rail
End Sections
Motor Unit with Light Lens
2-Conductor Bell Wire
White & White/Red
Curved Door
Arm Section
Safety Labels
and
Literature
6
Hanging Brackets
Straight Door
Arm Section