INSTALLING OPTIONAL FLOW STRAPS
1. Optional Flow Straps can be used when processing thicker paper stock. To install, fold over 1/2 inch of
strap. (Figure 19).
2. Place strap over static brush in appropriate location. (Figure 10)
NOTE: Straps should not be placed where they will interfere with the conveyor belts or the weighted out-
feed tires, (see Figure 13).
Figure 9
3. With strap in place, press clip down over strap. (Figure 11)
4. Figure 12 shows strap and clip in place.
NOTE: Clip must be removed before moving strap to a different location.
Figure 11
5. Repeat process on other side. Figure 13 shows two straps in place.
Flow
Strap
Figure 13
8
Figure 10
Figure 12
Flow
Strap