Choosing The Position Of Your Recording; Listening To A Recorded Voice Message; Deleting Voice Messages; Optional Folders - Bones milestone 112 ace User Manual

!

3.3. Choosing the position of your recording

Before recording a voice message you can choose the desired position for storing it.
Use the arrow buttons to navigate between the voice messages. Milestone 112 Ace always
stores the new recording right after the most recently played voice message.

3.4. Listening to a recorded voice message

To listen to a voice message press "Play" after recording. To pause playback of a message
press "Play" again.
If you have several messages use the arrow buttons to select the desired voice message.
Hint: You have the possibility to jump to the last or the first file. Push and hold "Right
arrow" and in addition press "Play" to reach the last file or push an hold "Left arrow" and in
addition "Play" to jump to the first file.

3.5. Deleting voice messages

Milestone 112 Ace enables you to delete voice messages directly without a connection to
the computer. Play the voice message you would like to delete. While the message is
playing, hold down the "Mode" button and briefly press "Play". The message will be erased
when you let go of the buttons. A message may be erased as well after the replay has
stopped.

3.6. Optional folders

For reasons of simplification Milestone 112 Ace has one container to store voice messages
by default. If requested, five folders can be activated. These folders can be used to group
the records according to their content. For example you can use one folder for phone
numbers, another one for your shopping list et cetera.

3.6.1. Unlocking folders

There are two ways to unlock the 5 folders. You can activate the folders with the file
"CONFIG MILESTONE.TXT" via computer connection. Further information you will find in
the chapter "Configuration possibilities". Or, you may use the following button combination
to get the folders:
Activate the keyboard lock and then push and hold "Selector". In addition push and hold
both arrow buttons. Keep the 3 buttons pressed for at least 10 seconds and Milestone will
confirm the activation.

3.6.2. Changing between the folders

Each front button is directly linked to one folder. To change the folder push an hold
"Selector", then in addition press one of the 5 front buttons. When releasing the buttons
you jump inside the dedicated folder. For example the button combination "Selector" and
"Mode" leads to folder M5 and "Selector" and "Right arrow" leads to folder M4.
5
/8