Bones Milestone 112 Manual
  1. Manuals
  2. Brands
  3. Bones Manuals
  4. Voice Recorder
  5. Milestone 112
  6. Manual

Bones Milestone 112 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Milestone 112
Manual
www.bones.ch
FW1

Advertisement

Table of Contents
loading

Related Manuals for Bones Milestone 112

Summary of Contents for Bones Milestone 112

  • Page 1 Milestone 112 Manual www.bones.ch...

  • Page 2: Table Of Contents

    3.7. Recording from external audio sources! 4. Shortcut overview! 5. Further information! 5.1. Technical data! 5.2. Configuration possibilities! 5.3. Protecting your Milestone! 5.4. Troubleshooting - nothing works anymore! 5.5. Service and support! 5.5.1. General information! 5.5.2. Software updates! 5.6. Further Bones products!

  • Page 3: Product Overview

    1. Product overview This chapter explains Milestoneʼs push buttons, connectors and other tactile parts. 1.1. Layout description 1.1.1. The operating surface Hold your Milestone in front of you with the buttons facing up. You will find five buttons on its surface - a big circular button in the center surrounded by four buttons arranged in a cross shape.

  • Page 4: Using The Interfaces

    “Information Service”. Please see the relevant section for details. 1.2.2. Headphones If you do not want to listen to Milestone 112 over the built-in speaker, simply plug in any headphones to the standard 3.5 mm headphone socket, located on the right bottom side of the Milestone.

  • Page 5: General Functions

    2. General functions 2.1. On / Off (sleep mode) Milestone 112 has no physical on / off switch. Press “Play” to start the Milestone 112. After ten minutes of inactivity, the device will automatically go into sleep mode to conserve battery life.

  • Page 6: Recording

    Push and hold the “Rec” button and then in addition press “Play” after you hear the short click. Milestone 112 will acknowledge the start of the continuous recording with the sound sequence “low pitched-high pitched”. To terminate the continuous recording, press the “Rec”...

  • Page 7: Optional Folders

    3.6. Optional folders For reasons of simplification Milestone 112 has one container to store voice messages by default. If requested, five folders can be activated. These folders can be used to group the records according to their content. For example you can use one folder for phone numbers, another one for your shopping list et cetera.

  • Page 8: Shortcut Overview

    4. Shortcut overview Function Operation Acoustic feedback Activate Milestone “Play” Starting sound Increase volume “Mode” + “Right arrow” “Volume up” (in paused mode) Decrease volume “Mode” + “Left arrow” “Volume down” (in paused mode) Lock or unlock the “Mode” + “Rec” “Keyboard locked”...

  • Page 9: Further Information

    Activate power off sound: Go to entry “enable_feature offsound”. Replace “0” by a value between 1 and 200. For example, enter 30 and Milestone 112 will play a short signal 30 seconds before it powers off. The value “0” disables the feature.

  • Page 10: Troubleshooting - Nothing Works Anymore

    Step 1: Is the device charged? Charge the built-in battery for at least half an hour. Afterwards press “Play” at least half a second. If Milestone 112 does not start go to step 2. Step 2: Is the keyboard locked? While keeping the “Mode” button pressed, press the “Rec” button briefly and listen for the response of the device:...

Table of Contents