Installation - Quha Sento User Manual

Installation

Quha Sento is delivered in two parts: the headband and the
cradle. The cradle has the puff sensor arm attached to it.
1. The headband is attached to
the cradle by pushing the
headband into the cradle
connector until it is fully
inserted.
Once inserted, the headband
and the cradle are
permanently connected to
each other and can't be
detached.
2. Quha Zono is inserted into
the cradle by pushing it as
shown in the diagram.
3. The Sento connector is
inserted into Quha Zono
charging port.
4. Quha Sento is now ready to
be used.
1
2
3